Setting a tablesaw fence with digital calipers - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: Setting a tablesaw fence with digital calipers (/showthread.php?tid=7355832) |
Setting a tablesaw fence with digital calipers - paulmon - 06-09-2020 I know this could be a little flashier (maybe later), but it works. I can use this handy little jig to accurately set my fence to a thousandth of an inch. As well, it works to calibrate the fence so that it is parallel to the blade. RE: Setting a tablesaw fence with digital calipers - Koda64 - 06-09-2020 Man that's pretty impressive Sir! Never thought of using calipers to measure my fence...again nicely done.. RE: Setting a tablesaw fence with digital calipers - Bill Schneider - 06-09-2020 Nice! You've got me thinking about building one for the times I need that kind of precision. RE: Setting a tablesaw fence with digital calipers - FireWood - 06-10-2020 Nice tip. I will remember that. RE: Setting a tablesaw fence with digital calipers - Wild Turkey - 06-14-2020 Used that idea today when I needed to set my TS fence for a rip cut just above 5/16" worked great! RE: Setting a tablesaw fence with digital calipers - Stwood_ - 06-14-2020 If I didn't have the Wixey, I would probably make one of those. Thanks for posting. |