+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Spindle Sander Dust Collection (/showthread.php?tid=7372814)
Spindle Sander Dust Collection - paulmon - 04-14-2023
[font=Inter, Helvetica, Roboto, Oxygen, Ubuntu, Cantarell, "fira sans", "droid sans", sans-serif]After I made my own spindle sander the dust that it creates was a little much so I decided to try and solve that issue. What I came up with worked SO much better than expected. [/font]
[font=Inter, Helvetica, Roboto, Oxygen, Ubuntu, Cantarell, "fira sans", "droid sans", sans-serif]https://youtu.be/pu_lUYkEDtE[/font]
RE: Spindle Sander Dust Collection - paulmon - 04-14-2023
OK... I'm not sure what happened so I'll give this one more try and post again.
After I made my own spindle sander the dust that it creates was a little much so I decided to try and solve that issue. What I came up with worked SO much better than expected.
https://youtu.be/pu_lUYkEDtE
RE: Spindle Sander Dust Collection - Handplanesandmore - 04-15-2023
I like that. Do ya think it'd help if part of the shroud is made of clear pvc material? Also, do you have a video covering the making of the homemade sander?
Simon
RE: Spindle Sander Dust Collection - paulmon - 04-15-2023
(04-15-2023, 08:34 AM)Handplanesandmore Wrote: I like that. Do ya think it'd help if part of the shroud is made of clear pvc material? Also, do you have a video covering the making of the homemade sander?
Simon
There is a link in the description to the video making the sander. Izzy Swan has an easier way to make one. (I'm very good at overthinking things). Making it from clear plastic might help but I find I can see the work just fine as it is.