03-29-2017, 10:46 PM
(03-26-2017, 10:05 AM)JGrout Wrote: Stand the stock up vertically and the bevel to 30* and cut.
Backer block may be required depending on the length of the cut
[img=20x400]here is an example of the setup [/img]
It worked.
I modified my Tenoning Jig. It was perfectly vertical to blade. Perfect 60 degree cuts. Thanks
Here is the picture.
![[Image: 33690045346_9ea6982fe4.jpg]](https://c1.staticflickr.com/3/2825/33690045346_9ea6982fe4.jpg)