Posts: 33
Threads: 0
Joined: Nov 2018
Looks like you have enough room between valve and shower unit, I would cut a 1x4 between studs and at each end cut some 2x4 material 2-3/4" long and pre drill for 2 screws each side.
Before putting in wall, secure the 2-3/4" blocks to the 1x4, pull 1x4 snug against cpvc shower side and secure cpvc at a location close to the valve with appropriate straps.
This way it makes a lot easier to secure 1x4 without splitting and a few choice words. The 2-3/4" blocks and 1x4 gives you 3-1/2", the thickness of your wall.
Posts: 2,273
Threads: 3
Joined: Feb 2005
Location: Central America
(08-12-2020, 07:11 AM)Flat Lander Wrote: Looks like you have enough room between valve and shower unit, I would cut a 1x4 between studs and at each end cut some 2x4 material 2-3/4" long and pre drill for 2 screws each side.
Before putting in wall, secure the 2-3/4" blocks to the 1x4, pull 1x4 snug against cpvc shower side and secure cpvc at a location close to the valve with appropriate straps.
This way it makes a lot easier to secure 1x4 without splitting and a few choice words. The 2-3/4" blocks and 1x4 gives you 3-1/2", the thickness of your wall.
Excellent idea! Thanks.
Posts: 64,558
Threads: 3
Joined: Feb 2007
Location: Merryland
(08-12-2020, 07:11 AM)Flat Lander Wrote: Looks like you have enough room between valve and shower unit, I would cut a 1x4 between studs and at each end cut some 2x4 material 2-3/4" long and pre drill for 2 screws each side.
Before putting in wall, secure the 2-3/4" blocks to the 1x4, pull 1x4 snug against cpvc shower side and secure cpvc at a location close to the valve with appropriate straps.
This way it makes a lot easier to secure 1x4 without splitting and a few choice words. The 2-3/4" blocks and 1x4 gives you 3-1/2", the thickness of your wall.
One word.... pocketscrews
Posts: 2,273
Threads: 3
Joined: Feb 2005
Location: Central America
(08-12-2020, 11:01 AM)Snipe Hunter Wrote: One word.... pocketscrews
I totally would have done that (and did that in my previous house), but my jig is in storage and I can't get to it. I didn't want to go buy another one. That's also another reason why I'm not sweating copper because I didn't want to buy another torch.
Posts: 33
Threads: 0
Joined: Nov 2018
(08-12-2020, 11:11 AM)atgcpaul Wrote: I totally would have done that (and did that in my previous house), but my jig is in storage and I can't get to it. I didn't want to go buy another one. That's also another reason why I'm not sweating copper because I didn't want to buy another torch.
By pre drilling the 1x4 into the ends and attach screws into 2x4x2-3/4 at each end then then pre drill 2 holes in each of the 2x4 pieces,slide assembly over cpvc risers,this makes it easy to secure, agreed pocket jig is my best friend, but if you don't have then I guess it's time for (mother of invention)
Good luck with your endeavor
Posts: 2,195
Threads: 1
Joined: Sep 2003
Location: Maryland
(08-12-2020, 11:11 AM)atgcpaul Wrote: but my jig is in storage and I can't get to it. I didn't want to go buy another one.
Lowe's around here sell the Kreg Jr. jig for $20 - includes drill and driver. Just sayin"....
Posts: 2,273
Threads: 3
Joined: Feb 2005
Location: Central America
(08-12-2020, 02:06 PM)joe1086 Wrote: Lowe's around here sell the Kreg Jr. jig for $20 - includes drill and driver. Just sayin"....
I am exceedingly frugal (not cheap). I just can't bring myself to buy another one knowing I have one.
Anyway, Flat Lander's suggestion is in place. I just need people from work to stop emailing me so I can get this over with.
Posts: 64,558
Threads: 3
Joined: Feb 2007
Location: Merryland
(08-12-2020, 02:15 PM)atgcpaul Wrote: I am exceedingly frugal (not cheap).
Then I'm in good company.