Posts: 317
Threads: 0
Joined: Mar 2008
I have to remove a shower stall (modern type) and what would be the best tool to cut it up to remove it? It cracked. Thank You Stan
Posts: 36,369
Threads: 3
Joined: Nov 2004
Location: RTP, NC
Posts: 6,423
Threads: 0
Joined: Feb 2002
Location: Truro,N.S. Canada
What Crockett said.
Mel
ABC(Anything But Crapsman)club member
Posts: 63,605
Threads: 3
Joined: Feb 2007
Location: Merryland
The cheap black harbor freight blades worked for me. I break a couple inches off of them so they don't poke through the other side of the wall.
Posts: 30,938
Threads: 2
Joined: Mar 2003
Location: Athens, TN
Yep. Break the blade off short. I use a fine pitch blade.
Rocket Science is more fun when you actually have rockets.
"The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government." -- Patrick Henry
Posts: 2,273
Threads: 3
Joined: Feb 2005
Location: Central America
Breaking the blade short is a good suggestion.
Expect lots of sharp fiberglass splinters.
Posts: 7,421
Threads: 1
Joined: Sep 2005
I have a 3-1/2" plunge circular saw. I probably would set the depth to about 1/4" or 1/2" and use that. It is light and easy to handle. I got it for cutting the 1/4" ply soffits for venting.
No animals were injured or killed in the production of this post.
Posts: 22,529
Threads: 0
Joined: Feb 2005
Location: Regina Saskatchewan Canada
Wear a decent dust mask.
Blackhat
Bad experiences come from poor decisions. So do good stories.
Posts: 7,421
Threads: 1
Joined: Sep 2005
A dust mask and goggles. If it is fiberglass the dust is a very bad irritant.
If it is rotationally molded it won't be so bad.
No animals were injured or killed in the production of this post.
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
07-07-2017, 09:32 AM
(This post was last modified: 07-07-2017, 09:33 AM by daddo.)
You could have someone hold the shop vac hose up to the cut or duct tape it to the reciprocating saw to catch dust. A hassle at the time, but makes a lot of difference afterwords- unless you forget to turn the shop vac on.