Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
I can't imagine a 1/16" blade. What does it look like, a piece of wire?
Posts: 1,084
Threads: 0
Joined: Mar 2006
(06-06-2019, 12:37 AM)bandsaw Wrote: I have one - got it at Highland Hardware
Guy used to demonstrate boxes and log castles on youtube - said he used a 1/16 inch blade
It's a little bigger than 1/16 not counting teeth
You guys that have a 1/16 bandsaw blade could you post a pic. Thanks
Posts: 849
Threads: 0
Joined: Jul 2006
06-18-2019, 12:10 PM
(This post was last modified: 06-18-2019, 12:12 PM by bandsaw.)
Here you go - 93 1/2" blade for a Delta 14" bandsaw
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
Looks like 1/8" with the teeth.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 849
Threads: 0
Joined: Jul 2006
06-18-2019, 09:07 PM
(This post was last modified: 06-18-2019, 09:09 PM by bandsaw.)
The divisions on the ruler are 1/16ths
It's 1/16" including teeth