Posts: 446
Threads: 0
Joined: Apr 2004
Hi, I’m working on a project and need a couple of hinges that have a little tension. I don’t want the pieces to swing too freely. It’s a fairly large item so they’d need to be larger than a typical cabinet hinge. Any suggestions are welcome. Thanks!
Posts: 917
Threads: 0
Joined: Sep 2008
If you can find a loose pin hinge that will work for you just remoe the pin and bend it a little or a lot depending on your needs. WE always did this for full size interior doors and it works great
Posts: 7,421
Threads: 1
Joined: Sep 2005
If I understand your question correctly, you want a "friction hinge". They are available in many sizes (and some of them are quite expensive).
https://www.google.com/search?client=fir...ion+hinges
Amazon sells some too.
https://www.amazon.com/friction-hinge/s?...tion+hinge
Here is a brief description:
https://www.essentracomponents.com/en-us...ion-hinges
No animals were injured or killed in the production of this post.
Posts: 446
Threads: 0
Joined: Apr 2004
(11-09-2020, 02:07 PM)Cooler Wrote: If I understand your question correctly, you want a "friction hinge". They are available in many sizes (and some of them are quite expensive).
https://www.google.com/search?client=fir...ion+hinges
Amazon sells some too.
https://www.amazon.com/friction-hinge/s?...tion+hinge
Here is a brief description: https://www.essentracomponents.com/en-us...ion-hinges
Great. Both ideas are good! Thanks!