11-28-2021, 08:07 PM
(11-16-2021, 11:56 AM)rwe2156 Wrote: Another vote for the tables.I had the same problem with tracking on a 16-32, one of the last ones before they got bought out by Laguna. Tried a replacement belt (sanding grit type) without any luck. Even had a friend of mine who sets up machines for Rockler look at it and he had no luck either. Finally got a replacement belt from Laguna that seems to be more of poly type material. That seemed to do the trick. This was what was suggested by the tech at Laguna. What I don't understand is why they don't supply this as standard equipment. I got mine from Acme Tool and I believe it was drop shipped from Laguna. Hope this helps- I was about ready to sell mine after the number of frustrating hours I spent trying to get the original belt to track.
I've had ongoing and seemingly unsolvable conveyor belt tracking issues. I'll give you my experience:
A couple calls to tech support and I'm on my 3rd conveyor belt, still no joy I have learned to watch it like a hawk. If the edges of the belt gets frayed, it supposedly won't track at all.
They said check the roller attached to the roller for parallel to the table. It was out a fair amount and I though that would fix it, but it did not.
If anyone has had the issue and any advice, I'm all ears.