01-14-2021, 08:48 AM
A few years ago I rebuilt my workbench, as part of it I added 1/2" holes on the side of the bench with the idea of attaching accessories that I need but don't have room for. My shop is small (16 x 20) so not much room for everything I'd like, like a router table. Yesterday I finally created a router table attachment, works beautifully.
Here is the table itself. I had some lexan sitting around from one of my son's old wheelchair tables. Provides a hard, smooth, non-flexible surface, and being able to see under it is kind of neat.
I mounted my Rigid trim router, plenty of power for what I need.
Here are the holes in the side of the bench. Next thought is for a lathe attachment.
Here is the table itself. I had some lexan sitting around from one of my son's old wheelchair tables. Provides a hard, smooth, non-flexible surface, and being able to see under it is kind of neat.
I mounted my Rigid trim router, plenty of power for what I need.
Here are the holes in the side of the bench. Next thought is for a lathe attachment.
Mike
I work on the 50-50-90 rule: If there's a 50-50 choice, I'll pick the wrong one 90% of the time!
I work on the 50-50-90 rule: If there's a 50-50 choice, I'll pick the wrong one 90% of the time!