#12
I signed up for a hand tool class that will require a bit of traveling to attend (just a few hours of driving each way) and I'd like some recommendations on traveling with chisels, scrapers, and planes. I was thinking of just setting everything in a bag and generally not tossing the bag around. The chisels have the little plastic tips to cover the edge, but everything wouldn't have much protection.

I should mention that I'm in the process of moving too, so any suggestions of making something quickly won't really work. Everything outside of said tools are packed, disconnected, and disassembled.
Reply

#13
I travel to the Marc Adams school twice a year. I usually put my chisels in a tool roll for traveling- keeps edges and blades from getting nicked up.

I have softside toolbags and a wooden toolbox i made. I just wrap what shouldn't get banged up with a towel or rag and they take the ride just fine. No issues to date and I've probably made that trip (250 miles) 5 or 6 times. Heading there April 6th as a matter of fact, maybe I'll see you there.
pat
Reply

#14
Pat Zabrocki said:


I travel to the Marc Adams school twice a year. I usually put my chisels in a tool roll for traveling- keeps edges and blades from getting nicked up.

I have softside toolbags and a wooden toolbox i made. I just wrap what shouldn't get banged up with a towel or rag and they take the ride just fine. No issues to date and I've probably made that trip (250 miles) 5 or 6 times. Heading there April 6th as a matter of fact, maybe I'll see you there.
pat




I'm actually taking a class with Jeff Miller in Chicago. We invited Jeff to ArnFest last year and he gave a pretty good demonstration and I wanted to do something this spring since I knew I'd be shop-less for a little while.

I lived in Indy for 4 years and I'm in the process of moving back to Ft Wayne, IN but I've never been able to work out taking a class at the Marc Adams school. I went there once to meet up with Robert Lang, but that was as close as I ever got.
Reply
#15
Before you put any of your planes in a bag, I recommend you wrap them individually with a rag, towel, or bubble wrap. That will protect them from being banged around. I've also traveled with my chisels in a tool roll.
Still Learning,

Allan Hill
Reply
#16
You can go a long way with tools carefully packed into a satchel, a suitcase, or even a laundry basket. Wrap the delicate ones, and set the heavier ones on the bottom.


The other option would be to nail together a travel tool chest. It wouldn't need to be anything fancier than a 6-board chest made of glued-up pine boards. Here's a build-along on mine.
Steve S.
------------------------------------------------------
Tradition cannot be inherited, and if you want it you must obtain it by great labour.
- T. S. Eliot

Tutorials and Build-Alongs at The Literary Workshop
Reply
#17
One thing folks haven't mentioned (maybe too obvious ) is to retract the irons on your planes. I sometimes put a strip of painter's tape over the sole to protect it, too.
Reply

#18
Phil S. said:


One thing folks haven't mentioned (maybe too obvious ) is to retract the irons on your planes. I sometimes put a strip of painter's tape over the sole to protect it, too.




I planed on doing that at least. I guess it will just be a quick wrap and pack for this trip.
Reply
#19
How about a Japanese tool box? They go together quickly, I think Wilbur made one.
Jim
http://ancorayachtservice.com/ home of the Chain Leg Vise.
Reply

#20
I use socks for most of my tools when travelling, big sports socks for planes, smaller socks for block plane, shoulder plane, etc. I have a 2 drawer Menard plastic drawer tool box, keep a set of road tools, so I don't have to pack and unpack every time. For the unique for that week stuff i carry a bussing tray.wrap saw with small hand towel. Don't forget ear protection. Ray
Reply
#21
While I have never travelled to take a class, I have travelled to work, and have taught classes.

I keep what I call my grab and go box. It has the most commonly used small hand tools, up to what I can easily enough carry. It is a steel two drawer lift lid box.

I have what I call my long box. It will hold a full size hand saw, steel square and a jointer plane along with a mid size level and other items too long for the grab and go box.

For teaching I'm packing items from the shop rather than using an organized sitework kit. I make good use of flip lid plastic totes, the ones that hold 8-10 gallons. Planes and stones get wrapped in rags.
Occasional musings on my blog:
bridgerberdel.wordpress.com
Reply
Traveling with Tools


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.