Posts: 22,337
Threads: 0
Joined: Dec 2004
Location: Monrovia, AL
Yes!
Sorry, no help, I know. I've got a key chuck and like it. I've never used a keyless Jacob's chuck but on my drill, I use the motor to turn the chuck in my hand to tighten it. You won't have that on a lathe.
I got mine from
Craft Supply
"73 is the best number because it's the 21st prime number, and it's mirror 37 is the 12th prime number, whose mirror 21 is the product of 7 times 3. Also in binary 73 is 1001001, which is a palindrome." - Nobel Laureate, Dr. Sheldon Cooper
Posts: 10,679
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
I like my keyless Jacobs chuck. It's much more substantial than the keyed one it replaced. A lot quicker to change out drill bits or Forstner bits. I don't remember which brand it is, but the chuck is a dark gray or black color. Might be the Turner's Select chuck sold by CSUSA.
Still Learning,
Allan Hill
Posts: 21,254
Threads: 2
Joined: Mar 2009
Location: IA
For me a Keyed Chuck since I have seen people use a keyless and the bits slip on them a lot.
I just got the 1/2" one from PSI and it has worked great for years now. I also open up the mouth and put the key into it so I never lose it.
I do now have the 1/4" for small drill bits.
Arlin
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 20,950
Threads: 0
Joined: May 2005
Own both, use the keyed on the lathe. I think it's more secure and easily secured than the lightly knurled keyless.
Got it through Woodcraft, I believe. "Golden Goose" brand with an outline of a pelican head etched in it.
Better to follow the leader than the pack. Less to step in.
Posts: 690
Threads: 0
Joined: Apr 2012
Location: Saranac Lake, NY
Thanks guys! I added one to the shopping list from wood turner's catalog. Now I just hafta stay out of trouble for the next month.
Train to be miserable...
that way when the real misery starts you won't notice.
Posts: 12
Threads: 0
Joined: Apr 2015
I have both for the wood lathes but use the keyless - I haven't used the keyed chuck for years. I have never had it slip when drilling.
BTW, I prefer to use bits with three flats ground where the chuck grips. The higher quality bits are often made like this.
JKJ