#17
I have the Beall Buffing system and the Tripoli wheel is getting a bit gummy. Does anyone know how to clean it? I poked around their website and could not find any advice.

I am not having that problem with the White Diamond or the Wax wheels.
Playing with my new friend "Joan" - she's a Jet!
P.S. I *am* the wife
Reply

#18
I've used a section of a power hacksaw blade. Something similar to this http://www.pjtool.com/buffing-wheel-rake.aspx
Reply

#19
Soak it for 30 minutes in warm water with laundry detergent, then have a go at the buffing edge with a stiff plastic bristled brush. Then rinse well and dry in the dryer for two cycles (can do with other items). Whatever you do, resist temptation to buff any metal with same wheel used for wood. Use separate wheels.
Reply
#20
Joe K1 said:


I've used a section of a power hacksaw blade. Something similar to this http://www.pjtool.com/buffing-wheel-rake.aspx




Be sure to mask up even if you're standing to the side as you do this. Curry comb is what I use. File card will work, but you have to be REAL gentle with your touch.
Better to follow the leader than the pack. Less to step in.
Reply
#21
Hacksaw blade or I mostly take my square scrapper to knock it off really easy.

I am really looking forward to seeing more of your work.

Arlin
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification.  Thank You Everyone.

It is always the right time, to do the right thing.
Reply
#22
+1 on the hacksaw blade . I always seem to have extra of the cheap hacksaw frames around , so I keep an old blade in one just for cleaning buffing wheels .
I know the voices aren't real but man do they have some great ideas !

People discuss my art and pretend to understand as if it were necessary to understand, when it's simply necessary to love. - Claude Monet
Reply

#23
Old hack saw blades make great chatter tools as well.

robo hippy
Reply

#24
Chatter tools? What are they?
Reply
#25
I use a thin slice of wood with a sharp edge, about 2" wide (mine is cocobolo since it is tough). I hold it against the spinning wheel occasionally, as a preventative measure. I've never seen a buildup.

But could you be using too much polishing compound? It doesn't take much.

JKJ
Reply
#26
80 Grit sand paper. I use a piece of an old belt sander belt. The directions say to use sand paper to reduce the fuzz before starting to use the pad. So I have been using sand paper to clean, works fast and easy!
"I tried being reasonable..........I didn't like it." Clint Eastwood
Reply
Gummy Buffing Wheel


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.