01-12-2016, 09:48 PM
Looking to attach an auxiliary wooden fence to the aluminum router table fence for zero clearance set up on occasional use of larger router bits, i.e., panel cutters. Figured it would be a simple matter of getting some t-slot bolts and putting together a simple mdf jig. Problem is, the t-slot on the aluminum fence will only accept about a 3'16" diameter bolt and I've only been able to find 1/4 or 5/16 diameter bolts. The head portion of the bolt can be about 5/16, but the diameter on the bolt itself needs to be about 3/16 in order to slide in the fence. If I modify the slot, the stops that came with the fence won't work. I'm not to concerned about the bolt head size as I figure in can file that down to size if I need, but the 3/16bolt diameter is kinda critical. If anyone can direct me to a t-bolt in this size, or offer another fix, it would be appreciated. FYI, the fence is an old WoodPeckers set that I've been using for years. Thanks