06-25-2016, 12:21 PM
Hi,
Normally I sand between coats by hand and more recently a sanding block.
I'm talking about shellac and water base poly mostly, sometimes wipe on poly. Never lacquer or or brush on oil base poly.
Wondering if it is safe to use a ROS with 320 per 220 grit between coats, or should I just stay with hand sanding.
These are on larger projects of course like desks and tables.
Mike
Normally I sand between coats by hand and more recently a sanding block.
I'm talking about shellac and water base poly mostly, sometimes wipe on poly. Never lacquer or or brush on oil base poly.
Wondering if it is safe to use a ROS with 320 per 220 grit between coats, or should I just stay with hand sanding.
These are on larger projects of course like desks and tables.
Mike