Posts: 114,786
Threads: 0
Joined: Jun 2002
Location: Sparkling Clearwater, Fl. Tampa Bay Area
Often Tested. Always Faithful. Brothers Forever
Jack Edgar, Sgt. U.S. Marines, Korea, America's Forgotten War
Get off my lawn !
Posts: 1,275
Threads: 0
Joined: May 2009
Location: Stuttgart, Germany
To my guess it's a LN clone made by Quiangsheng. They make a lot of LN clones for several brands with different quality. If it was a LN, the casted body would tell it probably. I never came across a LN Block Plane without the casted maker's mark.
Klaus
Posts: 3,017
Threads: 1
Joined: Aug 2009
Interesting: it looks like a substantial casting, but the bedding for the iron, from the photos, appears to have grooves in it. Is the bedding as irregular as it looks?
No reason why it shouldn't be a good plane, if the machining was done well, although installing a replacement iron, if the delivered iron is not a good one, might/would require cutting the adjuster slot.
Posts: 12,254
Threads: 0
Joined: Mar 2006
LN uses a bronze cap, this one is nickel plated.
Posts: 3,017
Threads: 1
Joined: Aug 2009
(08-03-2016, 07:54 AM)Timberwolf Wrote: I think the lines you see in the bedding are made by the milling machine end mills. But I could be wrong.
Likely so; the question, in terms of use, is whether these lines are actual ridges. If the bed is smooth, the milling marks are unimportant; but if the lines are ridges in the bed, that's what the iron will be resting on.