Posts: 219
Threads: 0
Joined: May 2013
Posts: 3,017
Threads: 1
Joined: Aug 2009
Generic term is "student lamp," and you can find them lots of places, including thrift stores and yard sales (now and again, of course; not like retail).
The base is clever.
Posts: 10,118
Threads: 0
Joined: Sep 2006
Location: South Alabama
The original Luxo lamps on which these are modeled are excellent but very expensive. Most furniture stores will have acceptable knock-offs in the lighting section. I got a cheap one for about $15, and I use it ALL THE TIME. It has a post that goes into a 1/2" hole in a cheap plastic stand. I drilled 1/2" holes at various locations in the back of my workbench, threw out the stand, and just move it from hole to hole as needed. It's the perfect workbench lamp. I really should get a second one.
Steve S.
------------------------------------------------------
Tradition cannot be inherited, and if you want it you must obtain it by great labour.
- T. S. Eliot
Tutorials and Build-Alongs at
The Literary Workshop
Posts: 10,677
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
Walmart sells a version also. Only $14.97. Google Adjustable Task Lamp or Architect's Lamp.
Still Learning,
Allan Hill
Posts: 2,416
Threads: 0
Joined: Jun 2003
Location: Charlotte NC
I have been thinking of ordering this one....I use a magnifying light at my sharpening station and might like one for the bench too since my eyesight is not that great. For close work it will be handy. Looks like it extends out a good ways too, 47inches. Expensive but probably good quality from Lee Valley:
http://www.leevalley.com/US/Wood/page.as...43349&ap=2
Posts: 4,315
Threads: 0
Joined: Dec 2006
Location: On my own Ignore List
I replaced my bench mounted lamp with a twin tube LED florescent light fixture hung above the bench. You can also get LED replacement tubes for a standard shop light. I recall that they are about $35/pr. The light is incredible and my bench is much less cluttered.
Posts: 202
Threads: 0
Joined: Sep 2005
On one of my benches I have two as your pictures shows mounted near the leg vise. On the other end by the wagon vise I have two of the desk top lights with the heavy flat base. I can quickly slid them around to get the light just where I want it. I have never bought a new one, I just pick them up every time I see one at yard sales or flea markets. I have never paid more than two dollars, sometimes only a dollar. And you usually get the bulb. One thing, most folks don't buy them because they have lost the plastic base, but a woodworker doesn't care, a block of wood with half inch hole and your done. I particularly like them because I position them below eye level and I can see better.
Ken