#26
Bug 
Please recommend a good gate for 2" PVC plumbing. Shopvac prime mover with Dust Deputy.
Gates will be inside a cabinet so I need to be able to attach a push - pull rod to them.
Happy to make my own too.
Ag
Reply

#27
I would try one of these: https://www.amazon.com/Valterra-T1002VPM...aste+valve
You can attach a longer pull rod if you need more length.
Reply

#28
Those are nice. I was thinking it was a good price at first, but you have to add two flanges to them which does bring the cost up. 

Blast gates are something that guys can easily make themselves. If I only needed just a few, I would probably buy them. If I needed a bunch of them, I would setup jigs and fixtures to help produce them and make a large batch of them. More than I currently needed to have some spares or for future needs. Lots of different materials and designs available.
Lee
Reply
#29
Ball valve? 


....
Confused Shrug?




Al
I turn, therefore I am!
Reply

#30
(09-19-2016, 03:54 PM)woodhead Wrote: Ball valve? 


....
Confused  Shrug?




Al

Schazamm....There is an idea....

Ag
Reply

#31
(09-19-2016, 04:35 PM)AgGEM Wrote: Schazamm....There is an idea....

Ag

If you go that route I recommend you use a full port valve.  Here's one example, http://www.northerntool.com/shop/tools/p..._200336735
Reply

#32
(09-20-2016, 09:39 AM)sweensdv2 Wrote: If you go that route I recommend you use a full port valve.  Here's one example, http://www.northerntool.com/shop/tools/p..._200336735

What would be wrong with a regular 2" PVC ball valve?  It's opens up fully, or at least as big as the inside of 2" PVC pipe.

$6 at the BORG. May have to make your own extension for the handle.

[Image: 60a22cf5-64b9-44a9-b751-dd2882f20097_400.jpg]
Reply

#33
Nothing wrong with those either, but for something this small, it is hard to argue against these.
http://www.homedepot.com/p/POWERTEC-2-1-...lsrc=aw.ds
They are 2.5", but I would think a 2" will fit just inside with  a gasket. What is the nominal size for 2" pvc? It's actually bigger, right?
Lee
Reply

#34
I'm with Lee, if the 2" aren't the "full flow" type, get 2 1/2 and bush it down.

Ed
Reply
#35
(09-20-2016, 01:43 PM)Stytooner Wrote: ........................
They are 2.5", but I would think a 2" will fit just inside with  a gasket. What is the nominal size for 2" pvc? It's actually bigger, right?

2.375" OD
Reply
Blast Gates


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.