10-19-2016, 10:59 AM
Trying to help a customer identify an older 6" jointer which has no name or badging anywhere on it. It has hand wheels under the beds for in feed and outfeed but the one feature that makes it unique is it has pull out rollers on both tables to allow you to extend them about 8 inches.
He can't send a picture and he looked around OWWM for a while with no luck, he's not very computer literate.
Just thinking the pull out rollers would be the one thing that somebody here might recognize. If this sounds familiar, please advise and it will help me try and narrow down the proper Byrd head for his machine. He is faxing me a head drawing but would be nice to know where to start.
Thanks
He can't send a picture and he looked around OWWM for a while with no luck, he's not very computer literate.
Just thinking the pull out rollers would be the one thing that somebody here might recognize. If this sounds familiar, please advise and it will help me try and narrow down the proper Byrd head for his machine. He is faxing me a head drawing but would be nice to know where to start.
Thanks