#22
I cut a hinge pocket on the wrong edge, the latch edge of my door.  Any suggestions on best method to patch it?
[size=undefined]Anybody can become a woodworker, but only a Craftsmen can hide his mistakes!
                                                   -Walter Blodget[/size]
Reply

#23
Are you painting or staining the door? Cut a wood patch and glue it in???

Reply
#24
staining the door
[size=undefined]Anybody can become a woodworker, but only a Craftsmen can hide his mistakes!
                                                   -Walter Blodget[/size]
Reply
#25
Cut another at the opposite end, fabricate filler pieces and call the result a new design.

Or, to get really involved, cut matching hinges and install them as fillers.
Reply
#26
I know it won't help but I've done it too.
Neil Summers Home Inspections




" What would Fred do?"

... CLETUS











Reply
#27
It really depends on how "invisible" you want the repair. The suggestions already stated are perfect if you are not trying to be inconspicuous, nothing wrong with that. The more you want the repair to be hidden, the more work involved.

Just something to ponder.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.

Garry
Reply
#28
What makes you think anyone will notice?
Reply
#29
Rip off that edge of the door to the depth of the hinge pocket and glue on a new piece of wood.  Lots of effort but it will be nearly invisible when done. 

John
Reply
#30
(07-16-2017, 08:51 PM)jteneyck Wrote: Rip off that edge of the door to the depth of the hinge pocket and glue on a new piece of wood.  Lots of effort but it will be nearly invisible when done. 

John

That is probably what I would do...or route it out and glue a new piece in so you don't disturb the face of the door.
Reply
#31
Well you have two things in your favor 

one you have the cutoffs from your original efforts 

Two  you can trim the door the depth of the hinge pocket so it is more like a rabbet then glue in a piece of the cutoff you have 

that preserves at least one face 

One more question you should answer is have you put the bevel on the door latch side yet? you need clearance for the door to close properly and if you have not put the bevel on yet you may just be able to trim it off



Joe
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future  John F. Kennedy 



Reply
I just screwed up


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.