#21
[attachment=5856]

I have metal conduit in my house.  I would like to replace some of the wiring.  Can I use this...it would be a lot easier to pull?
Here is a link to the Home Depot page.  

https://www.homedepot.com/p/Cerrowire-10.../205493357

Thanks.
Reply

#22
(11-20-2017, 02:31 PM)dwg Wrote: I have metal conduit in my house.  I would like to replace some of the wiring.  Can I use this...it would be a lot easier to pull?
Here is a link to the Home Depot page.  

https://www.homedepot.com/p/Cerrowire-10.../205493357

Thanks.

  I read the info in the link  you provided and it looks good for your use.
WoodNET... the new safespace
Reply
#23
(11-20-2017, 02:31 PM)dwg Wrote: I have metal conduit in my house.  I would like to replace some of the wiring.  Can I use this...it would be a lot easier to pull?
Here is a link to the Home Depot page.  

https://www.homedepot.com/p/Cerrowire-10.../205493357

Thanks.

 Yes        Roly
Reply
#24
(11-20-2017, 02:31 PM)dwg Wrote: I have metal conduit in my house.  I would like to replace some of the wiring.  Can I use this...it would be a lot easier to pull?
Here is a link to the Home Depot page.  

https://www.homedepot.com/p/Cerrowire-10.../205493357

Thanks.

Never seen that before cheaper and easier than pulling from 3 different spools if that's all you need
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."


Phil Thien

women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.

Reply
#25
(11-20-2017, 02:31 PM)edwg Wrote: I have metal conduit in my house.  I would like to replace some of the wiring.  Can I use this...it would be a lot easier to pull?
Here is a link to the Home Depot page.  

https://www.homedepot.com/p/Cerrowire-10.../205493357

Thanks.


Mmmmm.... the specs say max amps is 15.  Does this have to be derated for some reason? If you have 20 amp breakers in your old wiring, you may need to drop down to 15.
Reply

#26
(11-20-2017, 07:06 PM)srv52761 Wrote: Mmmmm.... the specs say max amps is 15.  Does this have to be derated for some reason? If you have 20 amp breakers in your old wiring, you may need to drop down to 15.

Thanks all for the responses.

SRV52761  I didn't even notice the specs that said max 15 amps.  I do need it for some 20 amps circuits.  I think though that HomeDepot has it wrong.  The Cerro website (near the bottom of the linked page) says its rated for 20 amps...so I think I am good but thank you for pointing that out.
 
  http://www.cerroretail.com/electrical/pr...bled-thhn/
Reply

#27
(11-20-2017, 07:18 PM)dwg Wrote: Thanks all for the responses.

SRV52761  I didn't even notice the specs that said max 15 amps.  I do need it for some 20 amps circuits.  I think though that HomeDepot has it wrong.  The Cerro website (near the bottom of the linked page) says its rated for 20 amps...so I think I am good but thank you for pointing that out.
 
  http://www.cerroretail.com/electrical/pr...bled-thhn/

 If you look at their specs at Home Depot for the 14-3 wire it says 20 amps.    Which is wrong, looks like they swapped the specs with the wire size.   Roly
Reply
#28
Some connections for that wire will be different as well.
Reply

#29
(11-20-2017, 09:13 PM)daddo Wrote: Some connections for that wire will be different as well.

Why?
(Thanks for any suggestions or things to look out for.)
Reply
#30
If you have metal conduit, you can skip the green.  Just get a spool of white and a spool of black.

If your local inspector will allow, Lever Nuts (manufacturer: Wago) makes a nice interface between stranded (even finely) and solid.
Reply
Stranded Cable in Home Wiring


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.