#9
So Bandit is tossing build threads on here all of the time and I feel so inadequate because of his desire and skills with working on the wood.  I hate you Bandit.
Big Grin
Big Grin

I have one build project which has been sitting on my workbench for a very long time.  I just cannot get off "Go" and have procrastinated so long I've about lost interest in this project.  All it is is a saw till.  Two sides, two French cleats notched into recesses in the sides for the back and maybe a couple of drawers on the bottom.  It ain't rocket science, but I am wanting to do this project unplugged.  Now comes the reason for my procrastination..... the sides.  I have two hand planed 7" x 18" x 1-1/8" pieces of red oak which I've been dealing with.  What I want to do is saw one piece into two halves, but do it with a rip saw.  It would be so easy to cut it on my table saw or resaw it with the band saw, yet I have told myself over and over to go unplugged.

I have two rip saws, one is a 3-1/2 tpi and the other is a 5 tpi.  Which one should/could I use?  Would 1/2" sides be thick enough for a till which will hold about 15 hand saws?  I've spent a lot of time getting these two red oak boards planed square and flat that I would hate to cut one in half just to have the sided not be strong enough for the weight.

Thoughts from you guys?
Reply

#10
Argue for your limitations and sure enough they're yours.
Reply
#11
I'm a looong way from being a good woodworker, but I think the 1/2" boards should be fine unless you really load up the drawers. As to which saw t use, I think either one will be fine. The 3 1/2 will cut faster but you'll need to be a bit more careful.
Currently a smarta$$ but hoping to one day graduate to wisea$$
Reply
#12
5pt, and yes, no problem.
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Reply

#13
(01-21-2018, 09:46 PM)Admiral Wrote: 5pt, and yes, no problem.

Yep, either a resaw or a rip operation with a 5pt saw is pretty easy.

And at 1/2" you can use a finer saw if you are ripping.

8pt-ish saws are very common and nice to have around.
Don't sweat the petty things and don't pet the sweaty things. -- G. Carlin
Reply
#14
(01-21-2018, 09:46 PM)Admiral Wrote: 5pt, and yes, no problem.

I agree. I just ripped two pieces of 4/4 red oak with a 9 point because it is the coarsest cutting saw I have. Not feeling a lot of sympathy for you not wanting to rip 1/2" with a 5 point I'd have killed for last weekend.
Big Grin  Get to work!
If you're gonna be one, be a Big Red One.
Reply
#15
Hmmmm
Rolleyes  
[attachment=7501]
Get busy.....
Show me a picture, I'll build a project from that
Reply
Quandry


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.