02-19-2018, 11:36 PM
Hello all,
As I work on my Bombe Slant Front Desk I am doing a lot by hand. Whenever something comes off of a power tool I always cut it over sized and then bring it down to size with my hand tools.
Tonight I was fitting some drawer fronts with a jointer and my homemade small infill.
The difference in shavings are very noticeable.
It is easy to tell how the different angles and mouth openings make a big difference in how a plane works.
[attachment=8359]
[attachment=8360]
Just thought I'd share.
As I work on my Bombe Slant Front Desk I am doing a lot by hand. Whenever something comes off of a power tool I always cut it over sized and then bring it down to size with my hand tools.
Tonight I was fitting some drawer fronts with a jointer and my homemade small infill.
The difference in shavings are very noticeable.
It is easy to tell how the different angles and mouth openings make a big difference in how a plane works.
[attachment=8359]
[attachment=8360]
Just thought I'd share.