I am building an armoire. The door styles have an inlay on each style. The inlays are contained in an inlay that I applied to each style. The inlay are quite ornate and have small "squares" attached to each of the four corners. The inlays came with a piece of tape that you apply to the inlay before finishing, then remove after finish is applied. I installed the tape and covered each inlay and the "corners". I then sprayed water based analyne dye on the styles. When I removed the tape, several of the corners bled dye onto them. One was completely covered. I did not flood the area.
These corners are smaller than a pencil eraser. How can I remove the dye from these veneer corners? The dye is dark brown and the corners are white maple.
These corners are smaller than a pencil eraser. How can I remove the dye from these veneer corners? The dye is dark brown and the corners are white maple.
"We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm"
Winston Churchill
Winston Churchill