11-23-2018, 05:34 PM
I have a Craftsman 113.299040 model with the cast iron top and stamped metal wings. The adjustment cranks are plastic. I cannot get the blade to 90 degrees, best I can do is 90.4 and it will not move any more. I have removed the blade stop collar from the angle adjustment rod. The tilt tension lock is very loose. Between 3 degrees and 89 degrees if is very smooth and easy to adjust. I have used a small brush to clean the trunion tracks and used dry lube on everything. I have a PALS alignment system on it. Any thoughts before I have to disassemble the cabinet and mechanism?
Thanks
Mals
Thanks
Mals
Mals
You can educate the ignorant - You can't fix stupid.