#18
Hello Gang -

I have a local buddy who owns a custom car shop.  He is looking for some mock-up parts preferably CNCed from 3/4" (BB?) plywood.  These "wheels" are 25" in diameter and he needs 8 of them.  He is based in the western suburbs of Chicago.  If you're interested, please PM me and I can send you his contact info.  Thanks!

[attachment=17393]
Reply

#19
Wish I could help but our programmer is an person, he makes excuses as to why certain programs can't be changed. I wish we had a better one, this would be perfect job for us.

Good luck
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.

Garry
Reply
#20
How many does he want? The programming is child’s play, but sadly, my CNC is too small.

I know a number of folks with bigger CNCs, but they mostly do this as a business.
Ralph Bagnall
www.woodcademy.com
Watch Woodcademy TV free on our website.
Reply

#21
(03-25-2019, 07:17 PM)handi Wrote: How many does he want? 

He needs 8.
Reply
#22
Gotta be a custom millwork shop nearby. Good luck.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.

Garry
Reply

#23
(03-25-2019, 07:20 PM)museumguy Wrote: Gotta be a custom millwork shop nearby. Good luck.

That was Plan B, and figured I'd ask here first to see if anyone was interested/capable.  Thanks, Garry.
Reply
#24
Cian,
This is a total shot in the dark---try Newfound Woodworks in Bristol, NH. They make cedar strip kayaks, kits and associated stuff. They have a CNC large enough to cut forms for kayaks and rowing boats so may be interested.

g
I've only had one...in dog beers.

"You can see the stars and still not see the light"
The Eagles: Already Gone
Reply
#25
(03-26-2019, 01:32 AM)Cian Wrote: That was Plan B, and figured I'd ask here first to see if anyone was interested/capable.  Thanks, Garry.

No problem. I didn't know if a local shop was going to be less expensive than an online order. Let us know how this turns out, I'm curious.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.

Garry
Reply
#26
Here’s another long shot. Here in Chico we have a Community Maker Shop, (not sure what they call themselves) where various crafts share their skills and possibly the tools. I had a potential job that could have used their 4”x8” CNC table. Rent for a month was $75.00. Given Chicago’s size, there has to something like that available for your friend. Goggle up "Makers in Chicago". One of many is SOUTH SIDE HACKERSPACE: CHICAGO.

Or, if your friend has the time and some help from you, show him that his need is mostly circles to cut and holes to drill and a little cutting out for the spokes. Make a template out of ½” MDF. Rough cut the ¾” and wear out a long pattern bit.
Bill
Reply
#27
Even if one does not have a CNC large enough to cut the part they may still be able to produce it if a 25" square can be physically located on the bed of the CNC. Just CNC all the inside details and then use a router and circle jig to cut out the outside.
Proud maker of large quantities of sawdust......oh, and the occasional project!
Reply
Seeking CNC services


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.