#11
  
What grease would you recommend for an older Craftsman angle grinder. I have recently acquired a grinder with #1 Lithium Base Grease recommended. I have not located a product described in this manner. Any suggestion as to the best grease to use for this application?
Reply

#12
  Grease for angle grinder Stove M What grease would yo...
NLGI grades we use are normally from 1 to #6. #1 being soft and #6 being almost solid. Grades 0000 or 00 are near liquid.

The #1 or #2 would also be fine. The NLGI  grade should be on the container.

Here's an outstanding grease; https://www.grainger.com/product/MOBIL-M...reme-2RV29
"There are no strangers- only friends I haven't met.
Reply

#13
  RE: Grease for angle grinder daddo NLGI grades we use a...
(06-29-2019, 06:06 PM)daddo Wrote: NLGI grades we use are normally from 1 to #6. #1 being soft and #6 being almost solid. Grades 0000 or 00 are near liquid.

The #1 or #2 would also be fine. The NLGI  grade should be on the container.

Here's an outstanding grease; https://www.grainger.com/product/MOBIL-M...reme-2RV29
Reply
#14
  Grease for angle grinder Stove M What grease would yo...
Woops, Was wanting to thank you, Daddo!
Reply
#15
  Grease for angle grinder Stove M What grease would yo...
Tube of white lithium, available at most parts stores.
Steve





*





Reply
Grease for angle grinder


Forum Jump:


Users browsing this thread: 1 Guest(s)