#17
I recently re discovered scraping as a finished surface prep. It depends on the wood of course and a very light sanding with some 220-320 is sometimes required. I have a Stanley 112,81, and a 12, plus a good card scraper. Sharpening is very easy after a bit of "experimenting", it sure saves me a bunch of monotonous sanding!
Now where is that chisel
Reply

#18
I bought some cards for scraping a while back.  Still haven't tried them.
Reply
#19
Once I discovered card scrapers, I spent far less $$$ on sandpaper. Sandpaper still has its place, but I don’t use the lower grits much at all.
Steve S.
------------------------------------------------------
Tradition cannot be inherited, and if you want it you must obtain it by great labour.
- T. S. Eliot

Tutorials and Build-Alongs at The Literary Workshop
Reply

#20
(07-10-2019, 05:20 PM)Bibliophile 13 Wrote: Once I discovered card scrapers, I spent far less $$$ on sandpaper. Sandpaper still has its place, but I don’t use the lower grits much at all.

+1
Reply
#21
(07-10-2019, 05:20 PM)Bibliophile 13 Wrote: Once I discovered card scrapers, I spent far less $$$ on sandpaper. Sandpaper still has its place, but I don’t use the lower grits much at all.

Same here. I rarely use 80 grit now.
Reply
#22
Now experiment! Take a sharp plane blade and pull towards you (works very well). Try one of the handled Stanley scrapers-they made many varieties. For first finishing, a scraper right off a filing will have a burr and work, but remember, for the best surface, the more you prep, the better the resulting work.

Also remember on sft wood, results are generally not that acceptable, but a scraper is still great to remove glue squeeze outs. On a hardwood, I can easily get asurface ready for finishing. You need a burnisher harder than the scraper, to burnish correctly.
Waiting to grow up beyond being just a member
www.metaltech-pm.com
Reply
#23
Make one of these for shaping ....

[Image: 1-zpspr2v0uh1.jpg]

[Image: 2-zpsp9yhsrcq.jpg]

Sharpens on the grinder ..

[Image: Sharpening-blade-scrapera-zpslgrvfjha.jpg]

Regards from Perth

Derek
Articles on furniture building, shop made tools and tool reviews at www.inthewoodshop.com
Reply
#24
(07-10-2019, 11:35 AM)Smashedfinger Wrote: I recently re discovered scraping as a finished surface prep. It depends on the wood of course and a very light sanding with some 220-320 is sometimes required. I have a Stanley 112,81, and a 12, plus a good card scraper. Sharpening is very easy after a bit of "experimenting", it sure saves me a bunch of monotonous sanding!
............................
Here's Paul Hamler's take on scrapers... how to make a good one and what he uses for steel.........I can testify that his idea on HSS works as advertised..

https://www.youtube.com/watch?v=OZOV9QYiMTw&t=860s
Often Tested.    Always Faithful.      Brothers Forever

Jack Edgar, Sgt. U.S. Marines, Korea, America's Forgotten War
Get off my lawn !
Upset





Reply
Scraping instead of sanding


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.