#6
Going to put a coat of water based poly on previously finished oak floors. Suggestions as to which product I should use would be appreciated.
Reply

#7
(08-05-2019, 09:41 AM)Gibbcutter Wrote: Going to put a coat of water based poly on previously finished oak floors. Suggestions as to which product I should use would be appreciated.

Can't speak to using it on floors, but I've heard really good things about Target brand WB coatings. I've only ever used Minwax WB poly myself, and I don't think this is recommended for floors. Take a look at the Target Coatings products.
Reply
#8
(08-05-2019, 09:41 AM)Gibbcutter Wrote: Going to put a coat of water based poly on previously finished oak floors. Suggestions as to which product I should use would be appreciated.

Bona HD.  But you need to make sure the existing floors are prepped properly so whatever product you use bonds to it.  

John
Reply
#9
(08-05-2019, 09:41 AM)Gibbcutter Wrote: Going to put a coat of water based poly on previously finished oak floors. Suggestions as to which product I should use would be appreciated.

Read the label. A lot of water based floor finishes require several coats. I used "Parks" on my stairs. It looks great and seems to hold up well but it requires a minimum of 6 to 7 coats. I did 7
Neil Summers Home Inspections




" What would Fred do?"

... CLETUS











Reply
Floor Finish


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.