#12
I know...take it in the house!
Wink

My shop is a (mostly) unheated garage. Does anybody have any ideas for a small "warming oven" to keep my glues from freezing? Maybe something I could run on a thermostat.

Thanks
Dave Arbuckle was kind enough to create a Sketchup model of my WorkMate benchtop: http://www.arbolloco.com/sketchup/MauleSkinnerBenchtop.skp
Reply

#13
(11-16-2019, 08:06 PM)MauleSkinner Wrote: I know...take it in the house!
Wink

My shop is a (mostly) unheated garage. Does anybody have any ideas for a small "warming oven" to keep my glues from freezing? Maybe something I could run on a thermostat.

Thanks

A wood box that is insulated and a light bulb will work.  An old refrigerator and a light bulb will work too but is pretty big just for glue. WOOD magazine has this  https://www.woodmagazine.com/wood-suppli...eated-shop

Al
Some people are like a Slinky. Not really good for anything but still bring a smile to your face when you push them down a flight of stairs.

A dead enemy is a peaceful enemy. Blessed are the peacemakers.
Reply
#14
(11-16-2019, 08:06 PM)MauleSkinner Wrote: I know...take it in the house!
Wink

My shop is a (mostly) unheated garage. Does anybody have any ideas for a small "warming oven" to keep my glues from freezing? Maybe something I could run on a thermostat.

Thanks

In the past I’ve used an Omaha Steaks insulated shipping box with a nite lite installed. Much like the WOOD magazine article. Has worked for years.  This year shop will be heated all the time albeit the thermostat turned way down at night.
Jim

There is a good chance
Broccoli doesn’t like you either.
Reply
#15
Buy the brand made with spring water!

Sorry I had to try to be funny!
Reply
#16
(11-16-2019, 08:06 PM)MauleSkinner Wrote: I know...take it in the house!
Wink

My shop is a (mostly) unheated garage. Does anybody have any ideas for a small "warming oven" to keep my glues from freezing? Maybe something I could run on a thermostat.

Thanks

I asked this question also...
Best,
Aram, always learning

"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery


Web: My woodworking photo site
Reply
#17
The light bulb heated box trick works. It's basically how outdoor soda machines keep things from freezing. You will need to choose a bulb that puts out heat. Sometimes, LED's won't heat enough to work. Old style incandescent bulbs work best.
Still Learning,

Allan Hill
Reply

#18
(11-16-2019, 10:21 PM)AHill Wrote: The light bulb heated box trick works.  It's basically how outdoor soda machines keep things from freezing.  You will need to choose a bulb that puts out heat.  Sometimes, LED's won't heat enough to work.  Old style incandescent bulbs work best.
I just keep my glues in the house to keep from freezing.  Likewise, you don't want to be gluing projects in an unheated garage
 below 50 degrees.  It won't cure properly.  Either do it indoors, or shine a heat lamp on it for at least a few hours.
Reply
#19
Thanks all! Looks like the light bulb thing is pretty simple.

AHill...Yes, I need to make sure the wood is at a reasonable temp as well. We just get a few cold snaps here, and then things warm back up again, so I'm looking more at a week of storage before I go back out in the shop.

Aram...Apparently my search skills aren't that good. I actually DID look for something.
Dave Arbuckle was kind enough to create a Sketchup model of my WorkMate benchtop: http://www.arbolloco.com/sketchup/MauleSkinnerBenchtop.skp
Reply
#20
Just to increase the Rube Goldberg effect, what do you guys think of adding a baseboard thermostat to the cooler/lamp circuit? I’d think it would be best served to have the thermostat inside the cooler...
https://m.youtube.com/watch?v=FZkSCud6tIY
Dave Arbuckle was kind enough to create a Sketchup model of my WorkMate benchtop: http://www.arbolloco.com/sketchup/MauleSkinnerBenchtop.skp
Reply
#21
Look around for a junker apartment size frig and turn it into your glue heater.
Or as above, build a box
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
keeping glue from freezing


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.