Make a couple of marks from the case to the rear bell to help in aligning things back together. Remove the 4 bolts that hold the motor together. You should be able to slide the rear end bell off about an inch with no further disassembly needed. The screw should be easy to grab or shake out at that point. Back together and give her a healthy dose of compressed air to clear the accumulated dust.
Blackhat
Bad experiences come from poor decisions. So do good stories.
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.