Posts: 13,882
Threads: 0
Joined: Apr 2002
Location: Texas
(04-30-2020, 12:38 PM)crokett™ Wrote: I made one using PVC that hangs on the wall behind my lathe. It has a plywood back, and bottom and triangle gussets on the ends. I cut the PVC at an angle on the top and bottom ends so I could run screws through the PVC into the back of the rack. Over time I've added bits to the front edge on the bottom to hang various accessories.
My lathe sits in the middle of the room (sort of) so I can work all around it. But I could look at modifying your idea to a mobile one
Posts: 8,203
Threads: 0
Joined: Aug 2002
I hang all my tools from a 2X2 over the lathe. Readily accessible, easy to do. I screwed an eyelet into the end of the tool handle and corresponding hook in the 2X2.
GM
The only tool I have is a lathe. Everything else is an accessory.
Posts: 21,255
Threads: 2
Joined: Mar 2009
Location: IA
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.