Posts: 2,692
Threads: 0
Joined: Dec 2005
Thats odd: it appears one of my replys has been deleted: I wonder what rule I broke?
Joe:
I treat everyone on the forum with respect and I'd appreciate the same from you.
Thanks
Phil
Posts: 671
Threads: 0
Joined: May 2011
04-04-2017, 05:33 PM
(This post was last modified: 04-04-2017, 05:34 PM by Joe Bailey.)
That is something which must be earned, not requested
Posts: 2,692
Threads: 0
Joined: Dec 2005
Joe: lets take this outside (offline). Thanks Phil
Posts: 227
Threads: 0
Joined: Feb 2014
Location: Lafayette, IN
The vise looks like light and tall, more suited for file work. How tall is it and how wide are the jaws? Location really drives the price. It took me 3 weeks to sell a 5 inch vise a couple of years ago. I was asking $120, which was less than all others on local Indiana craigslists. Also, size really plays into price. Really big or small go for more.
Posts: 2,692
Threads: 0
Joined: Dec 2005
Yes I will have to take some measurements and look a little harder for any markings that might identify the mfg. An interesting find for sure.
Posts: 227
Threads: 0
Joined: Feb 2014
Location: Lafayette, IN
I have seen quite a few with faint markings on the jaws. A lot of them have the weight stamped on the jaw facing the user. By the nature of the work they were used for, many had rough lives. As another person said, they were wrought iron. The markings get worn off through the years.
Posts: 10,118
Threads: 0
Joined: Sep 2006
Location: South Alabama
I was thinking it should be named Vincent. Vincent the Vise. Has a nice ring to it, I think.
Steve S.
------------------------------------------------------
Tradition cannot be inherited, and if you want it you must obtain it by great labour.
- T. S. Eliot
Tutorials and Build-Alongs at
The Literary Workshop
Posts: 2,692
Threads: 0
Joined: Dec 2005
So the answer to the original question: its called a $199 vise (just sold via craigslist).
The blacksmith that bought it was glad to get it and seemed more than pleased with the price.
Posts: 2,701
Threads: 0
Joined: Jul 2006
It is a blacksmith's leg vise. Like a wooden leg vise, it is capable of being set up to be as stable as any vise out there. Sturdy and dependable. Firm grip and easy use. An ancient and classic design. They are still sold and made and are considered to be a must have in a complete blacksmith shop. Or even a fairly minimal blacksmith shop really.
Leg Vise Listing at centaurforge
toolmakingart.com
When you have eliminated all unnecessary wood, then whatever remains, however well formed, is too small to serve as originally intended.
Posts: 3,471
Threads: 0
Joined: Dec 2006
Location: Sugar Land, TX
(06-24-2017, 08:16 PM)CedarSlayer Wrote: It is a blacksmith's leg vise. Like a wooden leg vise, it is capable of being set up to be as stable as any vise out there. Sturdy and dependable. Firm grip and easy use. An ancient and classic design. They are still sold and made and are considered to be a must have in a complete blacksmith shop. Or even a fairly minimal blacksmith shop really.
Leg Vise Listing at centaurforge
Bob;
Good to see you back in here again! Welcome back! Thanks for the link... interesting vise indeed... always interested in blacksmith shops..
Skip