Posts: 832
Threads: 0
Joined: Apr 2009
Location: Pacifc North Wet --AKA WA
Really should build a storage box/chest for my #55 as the flea market cardboard box it came in is deteriorating. Luckily, the wood boxes for the cutters are not damaged or missing.
Did the original #55 wood boxes have fitted compartments/dividers for the various parts? Once saw what was claimed to be an original #55 chest with dividers and the wood boxes for the cutters were on the end(s) the chest? Have also seen chests with the plane assembled and various parts and cutter boxes loose in the box.
Did a Google search and the few pictures that came up did not show the interior very well. Did a search here, but nothing came up concerning the #55 chest/box.
Appreciate any help, ideas, etc.
Posts: 481
Threads: 0
Joined: Jul 2008
(12-01-2018, 03:39 PM)Ray Newman Wrote: Really should build a storage box/chest for my #55 as the flea market cardboard box it came in is deteriorating. Luckily, the wood boxes for the cutters are not damaged or missing.
Did the original #55 wood boxes have fitted compartments/dividers for the various parts? Once saw what was claimed to be an original #55 chest with dividers and the wood boxes for the cutters were on the end(s) the chest? Have also seen chests with the plane assembled and various parts and cutter boxes loose in the box.
Did a Google search and the few pictures that came up did not show the interior very well. Did a search here, but nothing came up concerning the #55 chest/box.
Appreciate any help, ideas, etc.
I have an old 55 box. It's just a box. Nothing inside.
Posts: 2,018
Threads: 0
Joined: Jan 2003
I need to make one also, probably for a 45 too. I think I posted here for dimensions etc, a few years ago. I never did get it made, and have lost all the info. Not a big fan of the search feature here.
Posts: 5,017
Threads: 0
Joined: Jan 2014
Location: Santa Maria, Ca
12-03-2018, 12:27 AM
(This post was last modified: 12-03-2018, 12:28 AM by MarkSingleton.)
Mark Singleton
Bene vivendo est optimum vindictae
The Laws of Physics do not care about your Politics - Me
Posts: 2,018
Threads: 0
Joined: Jan 2003
Thanks for the hot tip. I guess I need to get going on it before I loose it again.
Posts: 63,481
Threads: 3
Joined: Feb 2007
Location: Merryland
Ray,
This might help. My grandfather made this box. The 4 cutter boxes slide in.
Kinda cool, the box handle is made from a pine knot, wire and square head bolts..
Posts: 832
Threads: 0
Joined: Apr 2009
Location: Pacifc North Wet --AKA WA
Snipe Hunter: thanks for the pictures!
Posts: 63,481
Threads: 3
Joined: Feb 2007
Location: Merryland
(12-04-2018, 10:57 PM)Ray Newman Wrote: Snipe Hunter: thanks for the pictures!
No problem. I have a few of my grandfather's tools and the "55" is my most treasured. My Dad inherited in the 60's and Dad gave it to me a couple years ago to make sure it stayed off the antique store shelf. Dad never took it out of the box so the shavings in the bottom were Grandpa's. Dad passed this year. I'm 57 and have a nephew on the west coast who is a woodworker, he's got Dad's/Grandad's Uni-Saw. I suspect I'll pass the "55" and the shavings to him one day but I'll be sure to use it first.
Posts: 2,018
Threads: 0
Joined: Jan 2003
Is the "55" box the same size as the "45"? That would be too easy!
Posts: 3,728
Threads: 0
Joined: Nov 2010
Doubt it....twice as much plane?
Stanley No. 45 box, Roxton Pond, QUE. Canada
Plane doesn't quite fit this way...
Have to tear it down...
Has only two rows of cutters...unlike the 55 that needs 4 rows..
Not enough room for 2 fences, and the sliding stock....and then the main stock with all the other parts,
There was a Stanley box with a sliding lid, that you could sit the plane into, it had the 4 cutter boxes stashed along one side wall...Main stock had enough room to sit on it's skates.
Lid just slid into grooves around the top of the box...like this..
YMMV
Show me a picture, I'll build a project from that