(02-19-2019, 08:17 PM)Redman Wrote: Small dollies huh. I'll need to look for those.
Worthless helper laying down on the job there between the hammer and pencil? And you gotta quit leaving them gloves out in plain sight. You'll never find them on that pick up bed. VOE, BTDT
New brown helper, sitting on the pad.
(02-19-2019, 08:34 PM)Philip1231 Wrote: Nothing but dovetails today:
Lotsa sawing going on there...
Steve
Missouri
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Making some shelf pullouts. Was band sawing the front hand holds and....K-Pow!!!!!!!!
Thought I broke a blade. Nope.......
Put the blade back on, spun the wheel to align the blade before I tension-ed it and ...pow!!!
It d-tensioned again. I've got something going on with the upper wheel tensioner. Hafta to pull the wheel to even see in there.
Steve
Missouri
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
(02-20-2019, 07:16 PM)Stwood_ Wrote: Making some shelf pullouts. Was band sawing the front hand holds and....K-Pow!!!!!!!!
Thought I broke a blade. Nope.......
Put the blade back on, spun the wheel to align the blade before I tension-ed it and ...pow!!!
It d-tensioned again. I've got something going on with the upper wheel tensioner. Hafta to pull the wheel to even see in there.
Did you blow a bearing?
Looks like new brown helper is laying down on the job, old worthless helper getting it done.
There is no such thing as too much horsepower, free lunch or spare change ~ anonymous
87% of people say their mental health is good to excellent. The rest are sane enough to know they are lying. ~ anonymous
(02-21-2019, 05:21 PM)Gary G™ Wrote: Mine’s an older Laguna 16LT made in Italy green machine.
Probably the same co made both.
My lower wheel seems to have shifted inward. 1/4 blade is riding on the outside edge.
Blade is running middle of the wheel on upper. Nothing seems loose.
The brake pad on the inside part of the lower wheel is somewhat out of the wheel. Yea it has a brake that I don't use
Steve
Missouri
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Putting some dominoes in a cabinet for a built in dishwasher.
Yea, I know, built in dishwashers don't need cabinets, except when they are replacing a stand-alone unit thats on the opposite side of the kitchen from the sink.
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
