Posts: 270
Threads: 0
Joined: Jan 2007
Location: Warrenton, MO
A buddy just bought this plane along with some other stuff and I guess he bought it cause he'd never seen anything like it. Me either, never seen anything with a throat that large . Can someone identify this and what its used for?
Was living the good retired life on the Lake. Now just living retired.
Posts: 1,150
Threads: 0
Joined: Nov 2006
Location: Texas - Gods Country
11-19-2019, 05:17 PM
(This post was last modified: 11-19-2019, 05:17 PM by Strokes77.)
Butt mortise plane.
Posts: 3,017
Threads: 1
Joined: Aug 2009
(11-19-2019, 05:17 PM)Strokes77 Wrote: Butt mortise plane.
Yep. Butt (hinge) mortise plane, used for the wide, shallow "mortises" (technically, since they're open on one side, rabbets) that butt hinges on doors fit into. They were developed for architectural hinges, I think, but could probably be used for hinges on large cabinets, too.
If you do some door hanging, I think they're a great tool.
I will wander from your original question to comment that the mortise for a butt hinge is not just a decorative feature. It transfers the weight of the door through the hinge to the jamb or the door itself, so that the screws need only keep the hinge in place, rather than carrying all the vertical weight of the door.
Some discussion of use here:
https://www.finewoodworking.com/forum/us...tise-plane
Or, my discussion of how I use the one I made for myself:
http://www.woodcentral.com/articles/hand..._114.shtml
Posts: 116
Threads: 0
Joined: Jan 2011
Rumbold patent.
For hinge mortises (repeated to hit 17 characters)
Posts: 10,715
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
More info on how to use a butt mortise plane (Lie-Nielsen makes a more modern version):
https://www.youtube.com/watch?v=ctKNbMOpcXo
Still Learning,
Allan Hill
Posts: 352
Threads: 0
Joined: Sep 2006
Yeah, Butt Mortise plane it is, it's more of a special purpose router plane, than a bench plane. It's length makes it easy to register it on the door edge.
~DC
Posts: 270
Threads: 0
Joined: Jan 2007
Location: Warrenton, MO
Thanks to all for answers. Now I'm jealous. He got it so cheap and it looks in decent shape. Used and new prices are insane.
Again, thanks to all.
Was living the good retired life on the Lake. Now just living retired.
Posts: 10,715
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
For what it does, a router plane is much cheaper and more versatile.
Still Learning,
Allan Hill
Posts: 3,017
Threads: 1
Joined: Aug 2009
(11-20-2019, 12:48 PM)Eurekan Wrote: Thanks to all for answers. Now I'm jealous. He got it so cheap and it looks in decent shape. Used and new prices are insane.
Again, thanks to all.
As I commented in the post I linked, you can make your own pretty cheap.
Posts: 3,017
Threads: 1
Joined: Aug 2009
I looked up the Rumbold patent on which which this plane is based (
here, from Datamp), and, to my surprise, it dates from 1951. I hadn't realized it was that late, and it explains why there's no Stanley version. By 1951, Stanley had discontinued or was discontinuing much of their plane line, including, back in 1934, their No. 171 door trim and router plane.
I find it interesting that it took that long to develop this idea. I personally find it a very quick, reliable way to make hinge and strike plate mortises.