Using scraps to make a shooting board, based on Professor Cohen's example. Starting simply--just a square fence, for now.
That's a piece of longer scrap across the middle, as I don't have any deep clamps to cross the runway. 16x11, or close enough once I plane down the sides after it's dried.
Thanks to UpstateNYDude for the Union Tool combo square I used for this, and to Mongo for the Veritas LA jack I'll be pairing to it. Cheers, guys!
That's a piece of longer scrap across the middle, as I don't have any deep clamps to cross the runway. 16x11, or close enough once I plane down the sides after it's dried.
Thanks to UpstateNYDude for the Union Tool combo square I used for this, and to Mongo for the Veritas LA jack I'll be pairing to it. Cheers, guys!