Arm-R-Seal and low VOC Mineral Spirits
#7
Anyone willing to post experiences with low OVC mineral spirits. Apparently there is now a CARB compliant low voc being sold here in SoCal. Just wondering if Arm-R-Seal works well with it. If so, I'll order some.
Thanks,  Curt
-----------------
"Life can only be understood backwards; but it must be lived forwards."
      -- Soren Kierkegaard
Reply
#8
(07-11-2020, 07:33 PM)cputnam Wrote: Anyone willing to post experiences with low OVC mineral spirits.  Apparently there is now a CARB compliant low voc being sold here in SoCal.  Just wondering if Arm-R-Seal works well with it.  If so, I'll order some.

If low VOC mineral spirits is the same whitish liquid they sell here in NY then save your money, and your Arm-R-Seal, because they are not compatible.  Whatever the white stuff is does not evaporate.  Needless to say, it's not a good look.  

John
Reply
#9
Thanks John! I would have been unhappy and rent the air with NSFW language.
Thanks,  Curt
-----------------
"Life can only be understood backwards; but it must be lived forwards."
      -- Soren Kierkegaard
Reply
#10
VOC ratings kind of a myth if you can look at product ingredients! Especially when manufacturers have option to list or not list hazardous ingredients. Found an SDS for this product and not sure how it can be called low VOC after looking at section three! When find 50-70% acetone, 25-50% naphtha hard to see how product could be considered low voc!

https://images.homedepot-static.com/cata...01e943.pdf

Other low VOC solvent / thinner contain much of the same ingredients found one product claiming to have low VOC’s but ingredients not provided by the manufacturer!

EPA and Green community say buy low or no VOC wood finishing products! Yes section 2 or 3 on a MSDS or SDS may list hazardous ingredients. Problem is what manufacturers fail to list in their products. California has gone overboard with some of their requirements. I would look at Water Based products available spray can products. Checked out Lowes in Oceanside, but there plenty of other brands that maker water based poly or lacquer.

https://www.lowes.com/search?searchTerm=...d+finishes
Bill
Reply
#11
(07-13-2020, 08:02 AM)Wildwood Wrote: VOC ratings kind of a myth if you can look at product ingredients!  Especially when manufacturers have option to list or not list hazardous ingredients. Found an SDS for this product and not sure how it can be called low VOC after looking at section three! When find 50-70% acetone,  25-50% naphtha hard to see how product could be considered low voc!

https://images.homedepot-static.com/cata...01e943.pdf

Other low VOC solvent / thinner contain much of the same ingredients found one product claiming to have low VOC’s but ingredients not provided by the manufacturer!  

EPA and Green community say buy low or no VOC wood finishing products!  Yes section 2 or  3 on a MSDS or SDS may list hazardous ingredients. Problem is what manufacturers fail to list in their products.  California has gone overboard with some of their requirements. I would look at Water Based products available spray can products. Checked out Lowes in Oceanside, but there plenty of other brands that maker water based poly or lacquer.  

https://www.lowes.com/search?searchTerm=...d+finishes

Acetone isn't included in the products counted towards VOC.  Go figure.  

John
Reply
#12
Some information https://www.popularwoodworking.com/finis...-solvents/


Normally "whitish" might indicate an emulsion.  I heard at one time it was being thinned with water.  https://www.woodshopnews.com/columns-blo...t-solvents
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.