09-10-2020, 05:11 PM
Wound up going back to the same spot a couple more times, even...1st was a $2 trip, for a smallish hand plane...
Stanley No. 31....24" long Jointer plane...the logo on the "nose" has a Stanley Rule & Level circle logo, with an Eagle....
Next trip?
Bishop No. 10....a center finder, and a small plane...
A Stanley No.3c ( mostly) Type 10-ish.....has a few issues..
Besides missing the iron and chipbreaker....wrong tote....it was using a block plane iron....
Parts. Next and last trip..( besides a Grocery run to Kroger's..)
Strange looking saw set ($2) and..
8 Dies ( $2) to add to the "collection" I am trying to build a case for...
All told (apart from the Grocery bill) spent $12 this morning...the Bishop saw is 14" long. the "Fine" teeth are almost worn away...the "rip" teeth are still very good...
IF I can get the body of the #31 flat...I can always rebuild a No. 28 that needs a few parts...as I already have another No. 31 in the shop...
We'll see how things go....
Stanley No. 31....24" long Jointer plane...the logo on the "nose" has a Stanley Rule & Level circle logo, with an Eagle....
Next trip?
Bishop No. 10....a center finder, and a small plane...
A Stanley No.3c ( mostly) Type 10-ish.....has a few issues..
Besides missing the iron and chipbreaker....wrong tote....it was using a block plane iron....
Parts. Next and last trip..( besides a Grocery run to Kroger's..)
Strange looking saw set ($2) and..
8 Dies ( $2) to add to the "collection" I am trying to build a case for...
All told (apart from the Grocery bill) spent $12 this morning...the Bishop saw is 14" long. the "Fine" teeth are almost worn away...the "rip" teeth are still very good...
IF I can get the body of the #31 flat...I can always rebuild a No. 28 that needs a few parts...as I already have another No. 31 in the shop...
We'll see how things go....
Show me a picture, I'll build a project from that