Big Ripsaw and Crosscut saw project
#51
I agree with Eric - the small pattern looks like a panel saw handle. I have a 20" panel saw with a handle that is so small I can barely fit my hand in it, even though I use a 3-finger grip.
"If I had eight hours to cut down a tree, I'd spend six hours sharpening my axe."

My Woodworking Blog: A Riving Home
Reply
#52
Yes, after some research I found out that I had used the D7 panel saw handle template. It's way too small for my hands. Here's the one I'm going to use

See ya around,
Dominic
------------------------------
Don't you love it when you ask someone what time it is and to prove how smart they are, they tell you how to build a watch?
Reply
#53
Dom,

Don't mean to hijack your thread, just some examples of the No.7 28" disston handle.

According to what we read on the Disstonian site, the Disston No.7 handle without the lamb's tongue was only used on their 28" rip saws. The handle does look and feel in proportion to the large blade. The grip hole extents a little higher at the top to allow for a thumb for two handed sawing, either left handed or right.

I have a couple of these saws, and are the most comfortable rip saws I've ever used for ripping.

Here's one example of one I refurbished ..



Here's another one..Notice how the upper part of the grip hole curves forward just a little.


One more...
Catchalater,
Marv


I did then what I knew how to do. Now that I know better, I do better.”
― Maya Angelou

I'm working toward my PHD.  (Projects Half Done)
Reply
#54
Great thread! Just to throw another thought into the "hang" thing, the aggressiveness of the saw also is affected by the rake. An otherwise aggressive hang can be diminished by a less aggressive rake.
Still Learning,

Allan Hill
Reply
#55
Wow, that handle closely resembles another one of my favorites. And that one is from a George Bishop & Sons cross cut saw

See ya around,
Dominic
------------------------------
Don't you love it when you ask someone what time it is and to prove how smart they are, they tell you how to build a watch?
Reply
#56
Dom,

The Geo. Bishop handle does resemble the No.7, but I think it is Bishop's copy of the Disston D8 with 5 screws. Does it have a cover top? The No.7 doesn't. What makes those handles more comfortable is there is an absents of nooks and crannies along the top.

Nice looking handle, but the end grain glue joint on the upper horn is not the best kind of joint in that situation.
Catchalater,
Marv


I did then what I knew how to do. Now that I know better, I do better.”
― Maya Angelou

I'm working toward my PHD.  (Projects Half Done)
Reply
#57
What's a "cover top"?


MarvW said:

.....but the end grain glue joint on the upper horn is not the best kind of joint in that situation.




I know. I know.

This handle is for the cross cut version of these saws. Do you think there would be an occasion to have your hands on the top when cross cutting? I was set to use that Disston Warranted Superior one in lieu of the D-7.
See ya around,
Dominic
------------------------------
Don't you love it when you ask someone what time it is and to prove how smart they are, they tell you how to build a watch?
Reply
#58
Probably one of the most enjoyable threads I seen on Woodnet. Dom, please be sure to continue the excellent documentation and I hope this thread remains on Woodnet for a long time. Marv, your comments are also very, very helpful the the thread.
Waiting to grow up beyond being just a member
www.metaltech-pm.com
Reply
#59
Dom,

You will find the cover-top handle design on the very first D8 saws Disston made. They later included the cover-top design on some of their other models like the D23 and most of their saws post 1928, even their D-12,s. When you look at the top front of the handle you don't see the edge of the blade through the handle.

Sorry, thought you were using that No.7 handle for a rip saw. My bad.
Catchalater,
Marv


I did then what I knew how to do. Now that I know better, I do better.”
― Maya Angelou

I'm working toward my PHD.  (Projects Half Done)
Reply
#60
You guys just aren't right. Flashing all those pretty saws in front of us poe folks. I wish I may. I wish I might. Have that saw I saw tonight.
BontzSawWorks.net
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.