Ceiling light fixture question
#7
I'm installing a recessed LED light in a walk-in closet. I'm using a new construction type of housing. It telescopes to match the ceiling thickness, which is nice. My question: is it supposed to lock down somehow? Or does it just rely on friction from the bent metal tab to keep from creeping downwards under the weight of the light? This model doesn't come with screws through the side.

Thanks!
Best,
Aram, always learning

"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery


Web: My woodworking photo site
Reply
#8
A reference or part number for the fixture you have would be helpful.
Reply
#9
Sounds like a can light. If it's a remodel can it has 3 or 4 black spring steel clips that you push up from the inside with a screwdriver and they clamp to the drywall.
Reply
#10
Howardly said:


A reference or part number for the fixture you have would be helpful.




Good point. It is this one.

Juno

Robert, it's a new construction housing, not remodel.

Thanks again all....
Best,
Aram, always learning

"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery


Web: My woodworking photo site
Reply
#11
If I found the right installation instructions this should take care of it.

Step 4. When installing in drywall, cut
appropriate sized hole.* After installing drywall,
if necessary, adjust fixture for ceiling thickness
by loosening hex screws that attach the round
housing to the plaster frame (Fig. 3).

http://www.junolightinggroup.com/attachm...0P5142.pdf
Reply
#12
bottd said:


If I found the right installation instructions this should take care of it.

Step 4. When installing in drywall, cut
appropriate sized hole.* After installing drywall,
if necessary, adjust fixture for ceiling thickness
by loosening hex screws that attach the round
housing to the plaster frame (Fig. 3).





Thanks. Missed that.
Best,
Aram, always learning

"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery


Web: My woodworking photo site
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.