Shop Purge
#9
Photo 
Another round of attempting to make shop space.  

[Image: Stewart%20MacDonald%20Non%20Cam%20Clamps...hixzfr.jpg]

Stewart MacDonald Camless Wooden Jaw Clamps.  I have 5 each of the 4.5" throat and the 8.5" throat clamps.  Very handy since they do absolutely no harm to the workpiece.  In good condition.  I'd like to sell these in batches by size. $37.50 for the 4.5" bunch and $45.00 each for the 8.5".  Buy all ten clamps for $75.00.  Either way, plus shipping.

[Image: Micro%20Mark%20Clip%20It%20001_zpsaw7if7jg.jpg]

[Image: Micro%20Mark%20Sand%20It%20001_zpstb2ujnlq.jpg]

Micro Mark Sand It and Chop It.  Very useful if you're making instruments or very small parts.  The Chop-It is a micro chop saw employing  a razor blade.  The Sand It is a tiny shooting board for squaring ends with an aluminum sandpaper block.  Ingenious.  I'd like $15.00 for the pair, plus shipping.  Or an every equitable split of $7.50 each, plus shipping.

[Image: 12%20Inch%20Sanding%20Discs%20001_zpsnrj74qfk.jpg]
Aluminum Oxide PSA Cloth sticky back 12” sanding discs, from USA1 Abrasives.  There are 17 discs left in the box.  These retail for $77 for 25, so I'm thinking $20.00 plus shipping.

[Image: Festool%20Eccentric%20Chuck%20002_zps0ben6o9y.jpg]
Festool Fast Fix Eccentric Chuck.  $60.00 plus shipping.  


[Image: Biscuit%20Joiner%20PC%20Mdl%20577.001_zpsu87r4vrx.jpg] 
Porter Cable 557 Biscuit Joiner.  Still has a place in the shop, but I don't need two of them!  $75.00 plus shipping.

[Image: Makita%20Palm%20Sander%20004_zps3g4uewiv...1469414573]
Makita Palm Sander Model BO4556.  Needs a new pad (still available for about $7.00) but has plenty of life left in it.  $15.00 plus shipping.


I will be posting a second batch of tools and a number of books shortly.

PM with any interest and inquiries.  Thanks!
Reply
#10
PM sent on the clamps.
Thanks!
You were going to shoot a bear with a nail gun?*likes this*
-carl
Reply
#11
PM sent on 12"sanding discs

Rick
Rick

Reply
#12
I am reposting the pictures, which seem to have disappeared.  Not sure why.

[Image: Stewart%20MacDonald%20Non%20Cam%20Clamps...hixzfr.jpg]



[Image: 12%20Inch%20Sanding%20Discs%20001_zpsnrj74qfk.jpg]

[Image: Festool%20Eccentric%20Chuck%20002_zps0ben6o9y.jpg]


[Image: Porter%20Cable%20557%20Biscuit%20Joiner%...cqf3vu.jpg]


[Image: Makita%20Palm%20Sander%20004_zps3g4uewiv.jpg]



[Image: Micro%20Mark%20Sand%20It%20001_zpstb2ujnlq.jpg]


[Image: Micro%20Mark%20Clip%20It%20001_zpsaw7if7jg.jpg]
Reply
#13
(07-26-2016, 09:45 AM)Rick_B Wrote: PM sent on 12"sanding discs

Rick
Hi,

Are the clamps still available?
Reply
#14
Hi, I sent a couple PMs - just wanted to confirm you got them - maybe they're not going through?

https://forums.woodnet.net/showthread.php?tid=7320581
Reply
#15
I'll take the Micro-Mark jigs.  PM sent.
Reply
#16
Hi All. Thanks for the interest.  The clamps, sanding discs, PC Plate Joiner, are all spoken for.  There is a buyer who expressed interest in the Micro Mark chop saw and shooting board, but I have not heard further from him.  I realize the updated system has upended many PMs.  So, I'm hoping he'll see my notes to him.  If not, on Tuesday I'll go to the next in line.  I have replied to all PMs, but I have a suspicion some of them have been eaten by those little bugs that wander the ethernet galaxy.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.