Wall Rack for Large Router Plane
#4
When I bought a Veritas Large Router Plane a few years ago, I also made a storage rack for the plane and accessories that hangs on the wall behind me within easy reach when I work at the bench.  It keeps the plane handy, but off my bench top.  The design allowed storage to grow as my usage evolved (and as LV offered more blades).  The rack was fun to design and quick to make.  I thought other router-plane users might find it of interest. 

<img src="http://i1379.photobucket.com/albums/ah146/paul-in-plymouth/Large%20Router%20Plane%20Rack/016d3529-7d6f-4cd1-8759-88dbc664acb5_zps5a5d1e76.jpg" border="0" alt=" photo 016d3529-7d6f-4cd1-8759-88dbc664acb5_zps5a5d1e76.jpg"/>

In summary:  Rack =  Plaque with cavity + perched Box + Shelf with replaceable Toolbar + auxiliary Prongs.  The cavity is sized to accept the blade in all configurations and extensions.  Rack is made from scraps of SYP construction lumber. 

<img src="http://i1379.photobucket.com/albums/ah146/paul-in-plymouth/Large%20Router%20Plane%20Rack/DSCN2908_zps10db84bd.jpg" border="0" alt=" photo DSCN2908_zps10db84bd.jpg"/>

The Box is an interlocking structure to hold the plane, perched on the face of the Plaque.  The sides of Box insert from bottom of the Plaque on vertical stopped sliding dovetails.

<img src="http://i1379.photobucket.com/albums/ah146/paul-in-plymouth/Large%20Router%20Plane%20Rack/DSCN2909_zps6b8b3682.jpg" border="0" alt=" photo DSCN2909_zps6b8b3682.jpg"/>

The floor of the Box is rabbeted at the back to engage a blind dado in the Plaque.  This locks the sliding dovetails in place.

<img src="http://i1379.photobucket.com/albums/ah146/paul-in-plymouth/Large%20Router%20Plane%20Rack/f1532099-61a4-4248-b1db-3aa9d97211e9_zps56cd2d97.jpg" border="0" alt=" photo f1532099-61a4-4248-b1db-3aa9d97211e9_zps56cd2d97.jpg"/>

The front of the Box is rabbeted on three sides to engage grooves in sides and floor.  This locks the floor in place.

<img src="http://i1379.photobucket.com/albums/ah146/paul-in-plymouth/Large%20Router%20Plane%20Rack/DSCN2914_zpswnhzdj5h.jpg" border="0" alt=" photo DSCN2914_zpswnhzdj5h.jpg"/>

Triangular notches in upper corners of the Box give thumb-access to knobs of plane.  I glued it together, added a rubber floor mat to damp vibration, and the Box was done.

<img src="http://i1379.photobucket.com/albums/ah146/paul-in-plymouth/Large%20Router%20Plane%20Rack/5aba3b5a-ef27-4504-a23a-8d1f33e2347f_zpsada9e946.jpg" border="0" alt=" photo 5aba3b5a-ef27-4504-a23a-8d1f33e2347f_zpsada9e946.jpg"/>

A narrow Shelf is attached to the Plaque with a horizontal sliding dovetail.  A replaceable Toolbar is screwed to top of Shelf for storage of extra bits.  Stopped grooves in the Plaque accept the sharp edges of extra bits.

<img src="http://i1379.photobucket.com/albums/ah146/paul-in-plymouth/Large%20Router%20Plane%20Rack/c17abc02-19cd-4144-89f8-f7771ace19cc_zpsjoqyouux.jpg" border="0" alt=" photo c17abc02-19cd-4144-89f8-f7771ace19cc_zpsjoqyouux.jpg"/>

Auxiliary Prongs were added to the Toolbar later as an alternative to the Box when using the OEM fence or other accessories like this 15º-sled.  They are retained by steel screws from the back of the Toolbar.

If I were to redesign this rack, I would probably strive for a single way to hold the plane.  The Box was the original concept.  It is neater and hides the blade better, plus it was more fun to design and make.  The Prongs were an ad-hoc addition to work with accessories I did not originally contemplate.  However, the current hybrid approach has served me nicely for the past 6 years, and I’m not likely to make a new one soon.

I made the sliding dovetails on an electric router table.  I roughed out the blade cavity and bored most holes on a drill press.  Most other operations were done by hand, many using the router plane itself.  Thanks for your interest.
Reply
#5
Thanks for sharing, nice handy project.


Steve
Reply
#6
I like to open concept--it keeps the tool ready to grab. I am always in a hurry and like to grab 'n go. Good project.
===---===---===---===---===---===---===---===---
Please visit my website
splintermaking.com
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.