Posts: 711
Threads: 0
Joined: Oct 2007
Location: N. Illinois
03-16-2017, 01:01 PM
(This post was last modified: 03-16-2017, 02:21 PM by rectangle618.)
I have some of these old Bedrocks, #'s 603C through 608C, all are "C's". They are solid users for me, but I really don't like the corrugated soles. Probably my bad technique, but when edge planing short pieces the corrugations sometimes catch on the workpiece edge. I watch the S&S and other old tool sources but have never seen any round-side Bedrocks that weren't "C", corrugated. Did they make them all this way? Or are there some smooth bottom examples out there? Just curious...
Mike B.
One thing is for certain though. Whichever method you use, you can be absolutely certain that you are most assuredly doing it wrong. Axehandle, 2/24/2016
Do not get in to much of a hurry buddy... Arlin, 5/18/2022
Apology excepted. TT. 2/25/20223
Posts: 23,974
Threads: 2
Joined: Sep 2003
Location: Missouri
03-16-2017, 01:30 PM
(This post was last modified: 03-16-2017, 04:24 PM by Stwood_.)
I've seen plenty of smooth soles in the round sides. I prefer the corr soles.
On edging, slant your plane sideways some and the corr won't interfere. That's what I do.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 484
Threads: 0
Joined: Feb 2011
They do exist. I have a round side 605 1/2 smooth sole.
Posts: 1,150
Threads: 0
Joined: Nov 2006
Location: Texas - Gods Country
Don't give up on the C's, they're great planes.
If you do, let me buy them from you.
Posts: 6,562
Threads: 2
Joined: Sep 2006
Location: North Florida
I see more C than plain. If the corrugation "catches" on the edge, try skewing the plane 5 degrees and see if that helps. I like corrugated planes, mostly because they are cool.
===---===---===---===---===---===---===---===---
Please visit my website
splintermaking.com
Posts: 711
Threads: 0
Joined: Oct 2007
Location: N. Illinois
Skewing is what I do normally, so it's really not a problem for me. The 'catches' I've had were due to me rushing the process and not paying attention. Mostly I was just wondering if Stanley made them all with corrugations. Interesting to hear that there is at least one 605 1/2 round-side out there with a smooth sole.
Mike B.
One thing is for certain though. Whichever method you use, you can be absolutely certain that you are most assuredly doing it wrong. Axehandle, 2/24/2016
Do not get in to much of a hurry buddy... Arlin, 5/18/2022
Apology excepted. TT. 2/25/20223
Posts: 10,679
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
My round sided 605 is a smooth soled plane. It's the only Bedrock I've ever found in the wild, but my rust hunting days were pretty limited - maybe just a couple of years.
Still Learning,
Allan Hill
Posts: 795
Threads: 0
Joined: Dec 2016
Just to throw a little more gasoline on the fire: I wonder if the round sided Bedrocks are better, the same, or worse than the flat topped Bedrocks?
Posts: 23,974
Threads: 2
Joined: Sep 2003
Location: Missouri
Castings are not as heavy as the flat side
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 481
Threads: 0
Joined: Jul 2008
(03-16-2017, 06:54 PM)Dayle1960 Wrote: Just to throw a little more gasoline on the fire: I wonder if the round sided Bedrocks are better, the same, or worse than the flat topped Bedrocks?
Not sure about the round side Bedrocks, but I had a 608C flat side, tuned it up, and compared it to my Stanley No 8C Bailey with a Hock plane blade. The 8C with the Hock cut much better than the 608C with the original Stanley blade.