Wardrobe Updates . . .
#11
A *long* overdue project has begun for mother-in-law.   Recent remodel had increased her 1st-floor bathroom size, but removed a closet.

Here was 3-weeks-ago 'tenoning project' to shore up the short-term hanger area:

<img src="http://i32.photobucket.com/albums/d38/C66RUPPEL/Interim%20Wardrobe%20After_zpsmjs3ydcm.jpg" border="0" alt=" photo Interim Wardrobe After_zpsmjs3ydcm.jpg"/>


Now I've started piecing together some sort of a wardrobe frame:

<img src="http://i32.photobucket.com/albums/d38/C66RUPPEL/Wardrobe%20Skeleton_zps1a2fv8ah.jpg" border="0" alt=" photo Wardrobe Skeleton_zps1a2fv8ah.jpg"/>


Today I found the LN140 could do a lot of rabbeting.  Easier to take the tool to the work, than the work to the tool, on a 6-foot plank!

<img src="http://i32.photobucket.com/albums/d38/C66RUPPEL/140%20on%20the%20Edge_zpscbfm6zpg.jpg" border="0" alt=" photo 140 on the Edge_zpscbfm6zpg.jpg"/>


More to come.... eventually!


Chris
Chris
Reply
#12
Nice start. Bonus points for MIL project.
===---===---===---===---===---===---===---===---
Please visit my website
splintermaking.com
Reply
#13
Love project in process posts!
Reply
#14
While I only got in a couple of hours through the work-week, I already saw problems needing solved.

It won't be a "purist" project since I've already used some decking screws to pull warped boards straighter against each other.  I'll cover those up with 3/8" hole plugs at the right time.

Also I could see an awkwardness (bulkiness) that encouraged me to think about some features to draw the eye a bit more upward.   I started a sketched scheme with something like a "ziggurat" top profile.

   

Whichever the design, a lot of the cuts will have to be pared "in situ" in order to line up correctly.   So I'd better get the planes and chisels sharpened up.


Chris
Chris
Reply
#15
The various claddings are roughing in now!
Lots of screw holes which will be covered up eventually.   However I am using a lot of hand-tuning on rabbets and edge-shooting as the details come into play.

<img src="http://i32.photobucket.com/albums/d38/C66RUPPEL/Cladding%20Wardrobe_zpsowvpx47t.jpg" border="0" alt=" photo Cladding Wardrobe_zpsowvpx47t.jpg"/>

Chris
Chris
Reply
#16
Some more work has come along....

I spent Friday night fitting up the lapped planks of the doors.  From inside the cabinet, you can see where I used some sassafras battens to hold them together:

<img src="http://i32.photobucket.com/albums/d38/C66RUPPEL/View%20from%20Inside_zpsn0tkeksk.jpg" border="0" alt=" photo View from Inside_zpsn0tkeksk.jpg"/>


The moment of greatest relief was confirming that the doors can work.  This is a trial of the NOS USA-made strap hinges I acquired:

<img src="http://i32.photobucket.com/albums/d38/C66RUPPEL/Strap%20Hinges%20Trial_zpsjeumxd7a.jpg" border="0" alt=" photo Strap Hinges Trial_zpsjeumxd7a.jpg"/>


Of course I still need some filler pieces for the side walls.  Why not use the 6-foot-long cabinet as a sawing bench?

<img src="http://i32.photobucket.com/albums/d38/C66RUPPEL/Long%20Pine%20Rip%20Saw_zpscilchgzz.jpg" border="0" alt=" photo Long Pine Rip Saw_zpscilchgzz.jpg"/>



Chris
Chris
Reply
#17
(04-28-2017, 06:03 PM)C. in Indy Wrote: It won't be a "purist" project since I've already used some decking screws to pull warped boards straighter against each other.  I'll cover those up with 3/8" hole plugs at the right time.

I often use a "finish head screw."  They are not as intrusive to the project as a deck screw. (The quick pick I found is a long one, but obviously you can get various lengths)

[Image: 61eq8rcCewL._SL1500_.jpg]

Nice project.  I plan on building a cabinet like that, hopefully late fall or early winter.  I am adding some pantry space in the laundry room, and that style will fit well.
I tried not believing.  That did not work, so now I just believe
Reply
#18
Oh boy, now I'm distracted by a great Horse Trade  (or, maybe more like when Elwood Blues traded a Cadillac for a microphone)...

Some of those rough-sawn steps will be straightened up as I proceed.

   


Chris
Chris
Reply
#19
For Mother's Day,  Mother-in-law's new wardrobe made it up the stairs!   At about 70 pounds with no doors, we slid it up on a cardboard piece.

It's not 100% done (still need to add some bits), but I did install about 65 hole-plugs Friday night.  Saturday I knocked them all down and went over the whole thing with a Sargent No.2 size plane.  With this mostly soft wood, there were times I could use that plane one-handed.   The two hardest (most pitch content) pieces of pine are the two side pieces where all the hinges anchor.

Happy woodworking,
Chris

   
Chris
Reply
#20
Today's mail brought the final latch piece we've been waiting for (from 'the Auction site').

Dear Mother-In-Law did lend a hand with the eggbeater.... drill that is...

   


And here's the interior with some spare planks serving as a floor.   After a lengthy break I may think about adding some shelves or drawers... one day!

   


Thanks for watching!

Chris
Chris
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.