Millers Falls eggbeater Side Handle thread type?
#5
Greetings,

I have picked up a very old Millers Falls No. 5.   The "chambered" main handle is a lovely true rosewood item, so I'd like to keep this eggbeater drill for personal use.


I do have 2 deficiencies to deal with...

(1.)  The entire side-knob (detachable threaded item, concentric with the Main Gear) is missing.   Would anyone know the typical thread size for this knob?


(2.)   The gear-knob (near perimeter of main-gear) is missing; but its unthreaded post remains.   Not to worry, I like a challenge like that for generating a "split turning...." like below on a brace I once repaired....

Any thoughts on question (1.) are appreciated!

Chris


<img src="http://i32.photobucket.com/albums/d38/C66RUPPEL/Shell_Halves_zps57b43cd3.jpg" border="0" alt=" photo Shell_Halves_zps57b43cd3.jpg"/>
<img src="http://i32.photobucket.com/albums/d38/C66RUPPEL/TackedHotDog_zpsd5f5513a.jpg" border="0" alt=" photo TackedHotDog_zpsd5f5513a.jpg"/>
Chris
Reply
#6
MF did not use bast**d size threads like Stanley, the side chef hat knob uses a standard screw size, go to the store and match one up.
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Reply
#7
(05-02-2017, 03:08 PM)Admiral Wrote: MF did not use bast**d size threads like Stanley, the side chef hat knob uses a standard screw size, go to the store and match one up.


Thanks for the tip & encouragement!   Just got home and tried a 5/16-18NC tap, which looked to be right.  Bonus, I have some matching bolts including brass toilet bolts, which can be good raw material.

Chris
Chris
Reply
#8
Nice pictures of replacement of the crank handle on a brace...not sure what it has to do with your question, unless it was just a driveby gloat.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.