Making trim with a plane
#21
  Re: Making trim with a plane by JimReed@Tallahassee (So I picked up this ...)
(05-09-2017, 03:48 PM)Bill_Houghton Wrote: ...with occasional upgrades).

The hardware, the software or the user??? Don't answer that.  I'm 68, too. Uhoh
Reply
#22
  Re: Making trim with a plane by JimReed@Tallahassee (So I picked up this ...)
(05-09-2017, 10:55 PM)Phil S. Wrote: The hardware, the software or the user??? Don't answer that.  I'm 68, too. Uhoh

The hardware, although not computer-related hardware.  Software's hopelessly stuck at version 1.0.
Reply
#23
  Re: Making trim with a plane by JimReed@Tallahassee (So I picked up this ...)
(05-09-2017, 10:55 PM)Phil S. Wrote: The hardware, the software or the user??? Don't answer that.  I'm 68, too. Uhoh

I'm 68... looks like it's going around...
Skip


Reply
#24
  Re: Making trim with a plane by JimReed@Tallahassee (So I picked up this ...)
I turn 64 next Monday. Uhoh ....I might be safe for a few years.. Laugh

As for making moldings.....I just use that Stanley #45 I have.    I can size the older moldings with the bead cutters....make the "bead"  then the slitter can slice the molding off the board.     Cool
Show me a picture, I'll build a project from that
Reply
#25
  Re: Making trim with a plane by JimReed@Tallahassee (So I picked up this ...)
I use a Stanley 45 and a Stanley 55 as well as hollows and rounds.
George

if it ain't broke, you're not tryin'
Quando omni flunkus, moritati.
Red Green

Reply
#26
  Re: Making trim with a plane by JimReed@Tallahassee (So I picked up this ...)
I made a miter jig so I can cut this tiny stock.





Hope to get into the shop this evening after it cools off so I can try to cut some pieces.
Reply
#27
  Re: Making trim with a plane by JimReed@Tallahassee (So I picked up this ...)
(05-10-2017, 06:37 PM)bandit571 Wrote: I turn 64 next Monday.
But will you still be getting valentines?  Will s/he still feed you?
Reply
#28
  Re: Making trim with a plane by JimReed@Tallahassee (So I picked up this ...)
Birthday greetings, bottle of wine? Laugh


Applebies on Sunday.....
Show me a picture, I'll build a project from that
Reply
#29
  Re: Making trim with a plane by JimReed@Tallahassee (So I picked up this ...)
So it turns out I made the jig backwards. Here is the revised jig.





And here are the three pieces cut out. The original is on the bottom. These pieces need a little trimming before glue up.


Reply
#30
  Re: Making trim with a plane by JimReed@Tallahassee (So I picked up this ...)
(05-11-2017, 10:06 PM)JimReed@Tallahassee Wrote: So it turns out I made the jig backwards. Here is the revised jig.
Just turn the saw around...
Don't sweat the petty things and don't pet the sweaty things. -- G. Carlin
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)