Scoring blade not working on Grizzly table saw
#6
I am having little problem I have purchased    Grizzly G0623X 10inch sliding table saw almost 5 months ago. It is good machine.
In the beginning it was working fine. Recently I have noticed the scoring blade is not working. the main 10 inch saw is working ok. Except the scoring blade not working at all could anybody  tell me what was wrong.
I could not find enough detailes regarding the scoring blade.

Reply
#7
readjust it 

 

if it is not scoring properly then it is worn and needs normal maintenance 


the manual is the place to find your information
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future  John F. Kennedy 



Reply
#8
Maybe the drive belt broke?

John
Reply
#9
thank you very much i have found the problem the belt came off i have to set up in the same place is before. it is very hard to bend under the machine, becauase i have bad knees both off them , so decided to sleep under the cover because the space is tight thank you guys very much

Reply
#10
(07-27-2017, 08:24 PM)jteneyck Wrote: Maybe the drive belt broke?

John

(07-27-2017, 10:06 PM)alsayyed Wrote: thank you very much i have found the problem the belt came off i have to set up in the same place is before. it is very hard to bend under the machine, becauase i have bad knees both off them , so decided to sleep under the cover because the space is tight thank you guys very much

Hope you remember where you are when you wake up!  
Winkgrin
Bob
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.