Struggling to replace MM-16 table
#26
LIL I'm thinking that removing the trunnions, mounting them to the saw and then mounting the top will be easiest. With supports under it in case I deke right and the table jukes left.
Best,
Aram, always learning

"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery


Web: My woodworking photo site
Reply
#27
Nothing wrong with doing it that way, except you'll have to do the major alignment instead of the minor.
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#28
(08-16-2017, 09:39 AM)Stwood_ Wrote: Nothing wrong with doing it that way, except you'll have to do the major alignment instead of the minor.

What would be involved? I know I'd have to get the table flat. Would I have to adjust it (more or less) square to the blade? What other alignment would be needed?

Thanks!
Best,
Aram, always learning

"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery


Web: My woodworking photo site
Reply
#29
Does it make sense to remove the trunions, and attach those to the saw, then place the table onto the trunions?

That would work on my (different make/model) saw, but don't know if it would work on yours.
"Links to news stories don’t cut it."  MsNomer 3/2/24
Reply
#30
(08-16-2017, 10:16 AM)Aram Wrote: What would be involved? I know I'd have to get the table flat. Would I have to adjust it (more or less) square to the blade? What other alignment would be needed?

Thanks!


Had to go look at mine again. I have a MM-16 also.
There's 4 jack/attaching bolts holding the table on. You have a certain distance between the table and trunion plate. Looks to be 1/2" or so.
Maybe make some wood spacer blocks to fit in there. That will give you a guide to follow when you put the table back on maybe.
Then, level and resquare the table to the blade.

Maybe?



I'd go find some lifting help.
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.