FS: Krenov plane irons, spokeshave blades, Knight smoother
#11
I bought a huge amount of tools last month. These new Krenov Style plane irons were in with them. They are marked dF. I think these may be irons that David Finck used to market, not sure though. (Update: Aram says I am correct in my assumption.)They are all 3/16" by 3-1/2". Anyway, I have several different sizes.

There are 2 in the 1-1/4" size....$25 apiece
There are 3 in the 1-1/2" size....$26 apiece
There are 2 in the 1-3/4" size....$28 apiece
There is 1 in the 2" size.............$30

I also have 2 blades for the 151 style spokeshave. These are 1/8" thick. I tried one in both a Stanley and Record 151. They engage with the adjusting nuts fine, will not fit though the mouth though. So, you would need to open up the mouth to accept this blade. 

$15 apiece

[Image: 20171014_103428-L.jpg]
[Image: 20171014_103449-L.jpg]

Knight Tool Works smoother. This is about 7-7/8' long with a 2" iron. Excellent shape.

$65 plus shipping

[Image: 20171014_120452-L.jpg]
[Image: 20171014_120458-L.jpg]
[Image: 20171014_120503-L.jpg]
[Image: 20171014_120538-L.jpg]
[Image: 20171014_120551-L.jpg]

I also have a couple of Hock Knenov style irons, one 1" by 3-1/2" and one 1-1/2" by 3-1/2"

1"....$28

1-1/2"....$34

[Image: 20171014_120710-L.jpg]
[Image: 20171014_120622-L.jpg]
Reply
#12
(10-14-2017, 10:29 AM)SteveF Wrote: I bought a huge amount of tools last month. These new Krenov Style plane irons were in with them. They are marked dF. I think these may be irons that David Finck used to market, not sure though. (Update: Aram says I am correct in my assumption.)They are all 3/16" by 3-1/2". Anyway, I have several different sizes.

There are 2 in the 1-1/4" size....$25 apiece
There are 3 in the 1-1/2" size....$26 apiece
There are 2 in the 1-3/4" size....$28 apiece
There is 1 in the 2" size.............$30

I also have 2 blades for the 151 style spokeshave. These are 1/8" thick. I tried one in both a Stanley and Record 151. They engage with the adjusting nuts fine, will not fit though the mouth though. So, you would need to open up the mouth to accept this blade. 

$15 apiece

I'll take one of the 1-1/4" and one of the 1-1/2". PM incoming.
Best,
Aram, always learning

"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery


Web: My woodworking photo site
Reply
#13
Sold so far:

One 1-1/4" iron

One 1-1/2" iron

Knight smoother

One spokeshave blade

Both Hock irons

Krenov plane
Reply
#14
I’ll buy the Knight plane. PM sent.

brad
Reply
#15
Wooden Krenov style plane. It has a 1-3/4" David Finck iron and is 11-1/16" long.

$45 plus shipping

[Image: 20171014_170431-L.jpg]
[Image: 20171014_170438-L.jpg]
[Image: 20171014_170447-L.jpg]
[Image: 20171014_170454-L.jpg]
[Image: 20171014_170519-L.jpg]
[Image: 20171014_170530-L.jpg]
[Image: 20171014_170537-L.jpg]
Reply
#16
Requesting 2-inch Finck blade. PM on way
Reply
#17
(10-14-2017, 05:18 PM)hbmcc Wrote: Requesting 2-inch Finck blade. PM on way

I didn't receive a PM.
Reply
#18
(10-14-2017, 05:08 PM)SteveF Wrote: i will take the krenov steve. pm sent.

thanks kenny

Wooden Krenov style plane. It has a 1-3/4" David Finck iron and is 11-1/16" long.

$45 plus shipping

[Image: 20171014_170431-L.jpg]
[Image: 20171014_170438-L.jpg]
[Image: 20171014_170447-L.jpg]
[Image: 20171014_170454-L.jpg]
[Image: 20171014_170519-L.jpg]
[Image: 20171014_170530-L.jpg]
[Image: 20171014_170537-L.jpg]
Reply
#19
Ray Iles replacement irons for Stanley and Record planes. These are high carbon steel and thicker than the originals, but not so thick that you'll need to open up the mouth. There's a little bit of rust on a couple of them, nothing much really (been sitting for years)

I have two 2" ones at $25 apiece
I have one 2-3/8" at $28
I have one 2-5/8" at $34
I have one for a no.10 rabbet plane at $28

[Image: 20171014_133051-L.jpg]
[Image: 20171014_132920-L.jpg]
[Image: 20171014_133033-L.jpg]
[Image: 20171014_132942-L.jpg]
Reply
#20
(10-15-2017, 01:18 AM)SteveF Wrote: I didn't receive a PM.
Yeah, I now notice. Sorry. Having trouble in my settings, but thought it was OK. Back to fiddling....
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.