How do you protect chisel edges?
#11
I've got about 20 chisels hanging on pegboard waiting to be knocked onto a concrete floor so their sharp edges can be chipped. Almost all of them have lost their edge guard. If you had some chisels without edge protectors what would you do to avoid the upcoming calamity I just described? There are two solutions I'm thinking about.
1) Buy edge guards online in sets of ten.
2) Buy some dipping plastic (Plasti-Dip) and see if that works.  
  All ideas will be appreciated. Thanks.
Reply
#12
IMO it is better to store them so that getting knocked off a pegboard is not inevitable. Just my opinion. I keep mine in a drawer of a home built tool chest.
Best,
Aram, always learning

"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery


Web: My woodworking photo site
Reply
#13
(11-04-2017, 01:01 PM)JSpill Wrote: If you had some chisels without edge protectors what would you do to avoid the upcoming calamity I just described? 

This tray moves about the shop and, when not needed, stores in a drawer.  I suppose it could just as easily hang on a wall if it were sloped back 20 degrees or so.

[Image: 38168772971_134c021842_b.jpg]



Safely stored away:
[Image: 38136877732_2f8a249fae_b.jpg]


Mike
Reply
#14
<img src='https://s1.postimg.org/2co4dlzntr/IMG_0057.jpg' border='0' alt='IMG_0057'/>

<img src='https://s1.postimg.org/599vg2uidr/DSC_0067_Medium.jpg' border='0' alt='DSC_0067_Medium'/>
Reply
#15
(11-04-2017, 01:01 PM)JSpill Wrote: I've got about 20 chisels hanging on pegboard waiting to be knocked onto a concrete floor so their sharp edges can be chipped. Almost all of them have lost their edge guard. If you had some chisels without edge protectors what would you do to avoid the upcoming calamity I just described? There are two solutions I'm thinking about.
1) Buy edge guards online in sets of ten.
2) Buy some dipping plastic (Plasti-Dip) and see if that works.  
  All ideas will be appreciated. Thanks.
...
I just make a sheath to fit out of cardboard and duct tape. Toss them in a tool bag, no problem.
Often Tested.    Always Faithful.      Brothers Forever

Jack Edgar, Sgt. U.S. Marines, Korea, America's Forgotten War
Get off my lawn !
Upset





Reply
#16
(11-04-2017, 07:27 PM)Hank Knight Wrote: <img src='https://s1.postimg.org/2co4dlzntr/IMG_0057.jpg' border='0' alt='IMG_0057'/>

<img src='https://s1.postimg.org/599vg2uidr/DSC_0067_Medium.jpg' border='0' alt='DSC_0067_Medium'/>

,,,,,,,,,,,,,
Ummm, Hank, that screwdriver on the bottom shelf right side is tilted slightly......
Rolleyes  
Rolleyes  
Crazy  
Big Grin  
Big Grin  
Big Grin
Opps!! Correction...it's the second one from the right..
Rolleyes
Often Tested.    Always Faithful.      Brothers Forever

Jack Edgar, Sgt. U.S. Marines, Korea, America's Forgotten War
Get off my lawn !
Upset





Reply
#17
I'm with ohiomike. Put them in a box. Bring the box out or put it away.
Reply
#18
Tongue 
(11-04-2017, 08:27 PM)Timberwolf Wrote: ,,,,,,,,,,,,,
Ummm, Hank, that screwdriver on the bottom shelf right side is tilted slightly......
Rolleyes  
Rolleyes  
Crazy  
Big Grin  
Big Grin  
Big Grin
Opps!! Correction...it's the second one from the right..
Rolleyes

Thanks, Jack. I fixed it.
Wink
Reply
#19
(11-04-2017, 01:01 PM)JSpill Wrote: I've got about 20 chisels hanging on pegboard waiting to be knocked onto a concrete floor so their sharp edges can be chipped. Almost all of them have lost their edge guard. If you had some chisels without edge protectors what would you do to avoid the upcoming calamity I just described? There are two solutions I'm thinking about.
1) Buy edge guards online in sets of ten.
2) Buy some dipping plastic (Plasti-Dip) and see if that works.  
  All ideas will be appreciated. Thanks.

I keep mine in a roll.
I tried not believing.  That did not work, so now I just believe
Reply
#20
(11-04-2017, 01:01 PM)JSpill Wrote: I've got about 20 chisels hanging on pegboard waiting to be knocked onto a concrete floor so their sharp edges can be chipped. Almost all of them have lost their edge guard. If you had some chisels without edge protectors what would you do to avoid the upcoming calamity I just described? There are two solutions I'm thinking about.
1) Buy edge guards online in sets of ten.
2) Buy some dipping plastic (Plasti-Dip) and see if that works.  
  All ideas will be appreciated. Thanks.

Quick and dirty way is to get a old piece of garden hose, cut it up into short pieces, cut a short slit in one side the width of the chisel, and push the chisel into the slit until it stops against the other side of the hose.

Not the prettiest but it will protect the chisel and not cost anything.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.